A Cachebuilder question....

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

User avatar
iadwm
Posts: 184
Joined: 15 Sep 2004, 16:24
Location: Southend on Sea, UK
Contact:

A Cachebuilder question....

Postby iadwm » 21 Jan 2009, 01:45

I wanted to add a single new personality to my custom cache file...

I hoped that Cachbuilder would read the disk it created and allow me to just add the personality. I could point it to the A drive, but it wouldn't read the disk. And I didn't have the time to re-compile the whole list.

I did speak to someone at Avo, but they couldn't really say one way or the other - it should work but clearly doesn't :?

So should this work or not? I need closure !

Regards,

Andy
"It's the prospect of hearing something that you could never have dreamed existed"
John Peel

www.iadwm.com
David.Hunt
Posts: 24
Joined: 24 Jul 2008, 12:15

Postby David.Hunt » 21 Jan 2009, 10:25

i apologise for not being able to give a clear answer yesterday. I had a look at the documentation for it and cachebuilder cannot load in cache files. You will definately have to start from the beginning.

Sorry
User avatar
iadwm
Posts: 184
Joined: 15 Sep 2004, 16:24
Location: Southend on Sea, UK
Contact:

Postby iadwm » 21 Jan 2009, 16:31

Hi David, thanks for confirming that.
After going through the list I realized there were a lot of fixtures that really didn't need to be there any longer, so a bit of spring cleaning wasn't such a bad thing in the end.

Cheers,

Andy
"It's the prospect of hearing something that you could never have dreamed existed"

John Peel



www.iadwm.com

Who is online

Users browsing this forum: No registered users and 42 guests