Martin Show Designer

Questions or discussions about the Titan and classic consoles and software.
Post Reply
gym1339
Posts: 12
Joined: 02 Sep 2004, 21:29
Location: Los Angeles

Martin Show Designer

Postby gym1339 » 08 Sep 2004, 01:42

Has anyone used Martin Show Designer with the Pearl 2004? Is it a good combination? What is the ACDI (hardware or software) and why do I need one to connect my console to my computer if I use the Martin PCMCIA card? Has anyone used such a card and if so which one (1024 or 2048 ch).

Thanks
Top
User avatar
Olie
Site Admin
Posts: 456
Joined: 11 Feb 2004, 15:24
Location: London
Contact:
Contact Olie

Postby Olie » 08 Sep 2004, 11:22

If you use the Martin PCMCIA card then there is no need to use the ACDI.

The ACDI is a software application that allows you to use the Midi Serial Interface cable to connect the desk to Martin Show Designer.

For more information please refer to the ACDI page:

Avolites Console DMX Interface (ACDI)
Avolites Software Team
Top
AJB
Posts: 1
Joined: 11 Sep 2004, 13:19
Location: Drachten, The Netherlands
Contact:
Contact AJB

Postby AJB » 11 Sep 2004, 13:21

You can also use an ethernet cable, with an ETC-ethernet/dmx switch. This way you can use up to 8 universes dmx for MSD. I used this combination a lot (aswell Pearl as the new Diamond 4). Love MSD and Avo, the combination works for me.

grtz AJB
Transfers light into emotion...
Top
Post Reply

Return to “Avolites Consoles”

Who is online

Users browsing this forum: No registered users and 118 guests