LAMP NOT OFF

Questions or discussions about the Titan and classic consoles and software.

Moderator: Moderators

Post Reply
bylan
Posts: 5
Joined: 10 Jan 2007, 09:28

LAMP NOT OFF

Postby bylan » 16 Jan 2007, 16:54

I use robe color wash 575AT. In the macro menu. The lamp on and lamp off. In the robe color wash 575AT NOT AFFECT. SOME BODY HELP ME!!!
Top
User avatar
Beaker
Posts: 74
Joined: 29 Nov 2006, 22:05
Location: Modesto California
Contact:
Contact Beaker

Postby Beaker » 16 Jan 2007, 18:51

I ran in to the same problem with my Mac250 entours. The macro is not writen for the lamp off command. I can lamp on, but not off.
-All of life is a learning curve.
Top
Dave
Posts: 24
Joined: 17 Aug 2006, 17:57
Contact:
Contact Dave

Postby Dave » 17 Jan 2007, 10:32

Bylan: I've looked through the ColorWash 575 AT personalities, and they all have the correct macros in them. I would suggest redownloading the personalities, patching them in, and seeing if the problem persists.

Beaker: I've checked through the Mac 250 entour personalities, and they also have the correct macros. However the off macro for the entour only supports lamping off if the Lamp Off option in the entour menu is set to "On". (You can read about the Lamp On/Off settings in page 12 of the entour user manual)

Edit:
Made last sentance less confusing.
Last edited by Dave on 17 Jan 2007, 17:35, edited 1 time in total.
Top
User avatar
iadwm
Posts: 184
Joined: 15 Sep 2004, 16:24
Location: Southend on Sea, UK
Contact:
Contact iadwm

Postby iadwm » 17 Jan 2007, 16:52

To reiterate what Dave said...

Check the fixture is set to: LAMP OFF VIA DMX ie from external control.

HTH

Regards,

Andy
"It's the prospect of hearing something that you could never have dreamed existed"
John Peel

www.iadwm.com
Top
User avatar
Beaker
Posts: 74
Joined: 29 Nov 2006, 22:05
Location: Modesto California
Contact:
Contact Beaker

Postby Beaker » 17 Jan 2007, 18:04

Dave wrote:Bylan: I've looked through the ColorWash 575 AT personalities, and they all have the correct macros in them. I would suggest redownloading the personalities, patching them in, and seeing if the problem persists.

Beaker: I've checked through the Mac 250 entour personalities, and they also have the correct macros. However the off macro for the entour only supports lamping off if the Lamp Off option in the entour menu is set to "On". (You can read about the Lamp On/Off settings in page 12 of the entour user manual)

Edit:
Made last sentance less confusing.


Thanks Dave! That worked. DLOF must be set to ON. And remember to press "Enter" after ON! Thanks again!
-All of life is a learning curve.
Top
Post Reply

Return to “Avolites Consoles”

Who is online

Users browsing this forum: No registered users and 39 guests