My D4 Elite is too big!

[dandanthelightingman]

A request for the Avo shop here: I have a limited amount of space in my control booth, especially front-back, and at the moment the desk is 2 inches forward of where it needs to be, because
1) the DVI-VGA adaptor sticks out so far;
2) the Littlelights come up behind the desk.

It would be invaluable if someone could source
1) a DVI-VGA cable, a few inches long would be fine;
2) an XLR socket on a clamp with a short length of cable, so that I can clamp Littlelights to the flanges of the desk, or to surrounding woodwork etc.

Any suggestions welcome!

[empyfree]

Here's a simple suggestion..

Send me your "too big" Elite

On reciept I'll send you my "too old" pearl!!!

It should fit your desk beautifully!


Alternatively, make a bigger desk!

[CoenCo]

there you go:
http://cgi.ebay.com/DVI-to-VGA-Dual-spl ... dZViewItem
http://cgi.ebay.com/P-R-E-M-I-U-M-6FT-D ... dZViewItem

for the desklights:
I don't know if your lights have straight or right-angle connectors, but if they are straight, you could swap those connectors for right-angle: http://www.neutrik.com/content/products ... 204_157241