Making a Cryo / Co2 Counter/ timer .... need help with the last stepp
Posted: 25 Aug 2023, 07:06
Good morning All,
I've been working on making a counter for Cryo/Co2 for a while now, so that I have insight into what I'm using.
Now I'm pretty far, only I can't get 1 thing done.
Short stepp::
I have a macro that allows me to activate and deactivate the internal clock:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<avolites.macros>
<!-- 23/01/2019 created : MRBos.nl -->
<macro id="sb.Macros.timecode.three.timer.start" name="Start Timer 3">
<sequence>
<step>Timecode.TimecodeThree.Play()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.three.timer.stop" name="Stop Timer 3">
<sequence>
<step>Timecode.TimecodeThree.Pause()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.four.timer.start" name="Start Timer 4">
<sequence>
<step>Timecode.TimecodeFour.Play()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.four.timer.stop" name="Stop Timer 4">
<sequence>
<step>Timecode.TimecodeFour.Pause()</step>
</sequence>
</macro>
</avolites.macros>
I create a cue in which I activate the cryo/Co2 jets.
Then I make a cuelist with 1 cue.
In this cue I load the previously created que, and connect the macro (above) to it.
Then I change the key profile of the cuelist to flash.
If I now activate the cuelist (flash) the internal clock will run properly.
However, when I release the flash, I can't manage to stop the internal clock!
Can someone give me a shovel in the right direction =)
Thanks.
I've been working on making a counter for Cryo/Co2 for a while now, so that I have insight into what I'm using.
Now I'm pretty far, only I can't get 1 thing done.
Short stepp::
I have a macro that allows me to activate and deactivate the internal clock:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<avolites.macros>
<!-- 23/01/2019 created : MRBos.nl -->
<macro id="sb.Macros.timecode.three.timer.start" name="Start Timer 3">
<sequence>
<step>Timecode.TimecodeThree.Play()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.three.timer.stop" name="Stop Timer 3">
<sequence>
<step>Timecode.TimecodeThree.Pause()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.four.timer.start" name="Start Timer 4">
<sequence>
<step>Timecode.TimecodeFour.Play()</step>
</sequence>
</macro>
<macro id="sb.Macros.timecode.four.timer.stop" name="Stop Timer 4">
<sequence>
<step>Timecode.TimecodeFour.Pause()</step>
</sequence>
</macro>
</avolites.macros>
I create a cue in which I activate the cryo/Co2 jets.
Then I make a cuelist with 1 cue.
In this cue I load the previously created que, and connect the macro (above) to it.
Then I change the key profile of the cuelist to flash.
If I now activate the cuelist (flash) the internal clock will run properly.
However, when I release the flash, I can't manage to stop the internal clock!
Can someone give me a shovel in the right direction =)
Thanks.