The Avolites Discussion Forum

Hey all,

I'm having an issue when running a chase with 1-99% crossfade that is tied to a BPM master. When I tap in a new tempo or change the multiplier occasionally the DMX output of the Dimmer channel (100 in all steps) will fade for a few steps. I experience this on 15.1 and the 16 beta. Known issue?

Thanks!
Jeff

Realized I lacked a ton of information.

Show with 4 ADJ Dotz TPAR fixtures.
4 step chase, all fixtures the same, assigned on Fader 1. Speed source BPM 1
100% Dimmer,100% Red
100% Dimmer,100% Green
100% Dim, 100% Red,!00% Green
100% DIm, 100% Green, 100% Blue

BPM Master 1 on fader 10, Slider set to Multiplier