new user - LED flash
Posted: 14 Mar 2022, 02:46
I want to create a button on the playbacks window that can be used to flash the hex LED fixtures into a bright, warm incandescent-like flash with an fade in of, say 20ms and a fade out of around 250ms, mimicking the blinders that you might see at a rock concert that radiate heat and are quickly flashed on and off. How would I go about this?
I have pretty basic knowledge, and am currently using the fixtures with a chase where I can toggle them between ambient and highlighting settings. I would want to keep this functionality and have it fade back to that cue as the incandescent glow fades.
Also, is there a way to create a playback button that brings the strobe and CO2 dimmers up when held down and then turn them off when let go, or failing that, a toggle mode.
I also don't understand the way that changing info with the wheels causes it to stay set, even when playbacks are fired. How do I change this?
Sorry for all the questions!
I have pretty basic knowledge, and am currently using the fixtures with a chase where I can toggle them between ambient and highlighting settings. I would want to keep this functionality and have it fade back to that cue as the incandescent glow fades.
Also, is there a way to create a playback button that brings the strobe and CO2 dimmers up when held down and then turn them off when let go, or failing that, a toggle mode.
I also don't understand the way that changing info with the wheels causes it to stay set, even when playbacks are fired. How do I change this?
Sorry for all the questions!