Bug? Chase handle view can show incorrect chase speed value

Welcome to the Avolites TitanOne Support Forum

Moderator: Moderators

revenant
Posts: 51
Joined: 25 Oct 2020, 14:36

Bug? Chase handle view can show incorrect chase speed value

Postby revenant » 22 Nov 2021, 11:12

Titan Go V15

The handle view (,the display area above fader playbacks,) for chases always shows the local chase speed and ignores or fails to account for any speed source selection. This results in the handle view showing incorrect chase speed values when the chase's speed source is allocated to a BPM or Rate Master.

Repro as follows -

1. Start new show
2. Create BPM Master 1 on fader playback 1
3. Set BPM Master 1 rate to 120 BPM
4. Create (Chase 1) a 4 step Chase on fader playback 2
5. Notice, handle view for Chase 1 shows speed to be 60 BPM (default local speed)
6. Set Chase 1 Speed Source to [BPM Master 1]
8. Observe, handle view for Chase 1 shows chase speed to be 60 BPM, firing Chase 1 shows actual speed of chase to be 120 BPM as set by BPM Master 1

Who is online

Users browsing this forum: No registered users and 29 guests