PC spec. for Titan 10.1

Welcome to the Avolites TitanOne Support Forum

Moderator: Moderators

watty
Posts: 120
Joined: 30 Oct 2015, 10:21

PC spec. for Titan 10.1

Postby watty » 29 Nov 2017, 19:55

Can anyone provide an informed opinion as to whether I could run Titan 10.1 on an Intel NUC which has an Intel Core i5 -5250U at 1.6GHz with 8GB of Ram.

I am currently running 9.1 on this machine but as I have a Titan Mobile running 10.1 on another (higher spec.) machine, I would prefer to have them both running 10.1 as the Titan One is mainly used as a back-up and it would be good if I could use shows from the Titan Mobile in Titan One.

Thanks in advance for any help provided.
Beast
Posts: 53
Joined: 04 Feb 2011, 08:02
Location: Denmark

Re: PC spec. for Titan 10.1

Postby Beast » 01 Dec 2017, 08:18

Well i haven’t tried a Nuc, but if you look at the recommended specs for Titan Pc under information/installation notes, it might struggle a bit, depending on ssd or not, and the graphics card in the Nuc. There is a link in information for the Passmark site, where you can check the graphics.
Have read in the forum, that due to the ekstended undo funktion an ssd is a must.

Sincerely

Beast DK
clublights
Posts: 266
Joined: 07 Mar 2004, 15:13
Location: Denver, CO USA
Contact:

Re: PC spec. for Titan 10.1

Postby clublights » 05 Dec 2017, 05:55

might be a BIT slow but will likely be OK

tho
SSD is REQUIRED for V10+
User avatar
Gregory
Posts: 1301
Joined: 14 Dec 2007, 15:25
Location: London, United Kingdom
Contact:

Re: PC spec. for Titan 10.1

Postby Gregory » 08 Dec 2017, 22:05

Most NUCs have a port where an mSATA (or M.2) drive can be connected, which is an SSD. This normally be the best option even though there may be a SATA connector on the motherboard as well.

Who is online

Users browsing this forum: No registered users and 17 guests