The Avolites Discussion Forum

Hi there
I’m new at this forum bit, I’m working titan one system. Can anyone help me I’m trying to see if it is possible to put bpm on a SGM Flasher 1.5 strobe if so How

Thanks

According to the fixture manual the range is 0 to 50 flashes per second which theoretically translates to 0 to 3000 flashes per minute. So you could edit the personality and change the strobe display range to 0 to 3000. I wouldn't rely on this being too accurate though, especially as there are only 256 discreet levels within the range (ie. the actual resolution would have a variance of up to 12 BPM either side of the value set).

thanks for that.now can asign bpm1 master to a cue so if the band is at 25 bpm set my strobe to the same ? if so how

thanks

No. That is not possible, sorry. Speed masters apply to chases and shapes.

thanks for all your help

stuart

If the band is quite consistent and play on metronome you can set different strobes on the beam palletes. Or just mode 2 like a professional busker