Hi all, i have problem with T1 out put . all fixture already dmx cable and work on Martin Lightjockey is ok. When i connect on T1 all fixture alert have dmx but i cannot control them. How i can do it ?? Hepl me please...
Re: Problem with DMX out
Posted: 26 Sep 2013, 12:26
by Gregory
Please ensure that you have assigned TitanOne in DMX Output Settings.
What fixtures have you got connected? What is your patch in the software?
Re: Problem with DMX out
Posted: 26 Sep 2013, 14:42
by huynhlight
China light don't have on personalities I write by my self. and I had previously controlled it ok
Re: Problem with DMX out
Posted: 26 Sep 2013, 15:10
by huynhlight
I have tried on dimmer pack still cannot control
Re: Problem with DMX out
Posted: 28 Sep 2013, 13:52
by Gregory
Can you do a New Show with Wipe DMX Settings turned on. Then check in DMX Settings that DMX Output A is assigned. Then patch 10 dimmers and check if you get any output. If you have a DMX tester that would be best or if you have a simple LED fixture and plug it directly into the dongle.
Re: Problem with DMX out
Posted: 29 Sep 2013, 15:49
by huynhlight
hi guys,I have tried everything,but cannot control.