Hi Guys,
I continued testing the Titan One Dongle and discovered it doesn't work well over Artnet + CITP. I tested it on Arkaos Media Master 3.1 and 3.0.
When I select PATCH - ACTIVE FIXTURES, the Titan One can see AND patch the Media Master Fixtures but it does not control them. I even can't locate them.
So what I did, I did the Active Fixture Patch on the Tiger Touch, and it worked. Then I saved the showfile to a usb stick an loaded it in Titan One.... then it didn't work.
Can somebody please look at this because I bought the Titan One for demoing Media Servers and it doesn't work now
Titan One does not work well with Arkaos Media Master
Moderator: Moderators
-
- Posts: 10
- Joined: 18 Dec 2012, 21:12
- Location: Netherlands
- Contact:
- john rogers
- Posts: 97
- Joined: 18 May 2010, 12:29
- Location: London
- Contact:
-
- Posts: 10
- Joined: 18 Dec 2012, 21:12
- Location: Netherlands
- Contact:
john rogers wrote:Hi, can you give me some information on the system you're using to run Titan One and Arkaos on? Operating System, specifications, that sort of thing?
Setup that doesn't work:
Titan One (Artnet OUT)
Macbook 13" Bootcamp
Windows 7 Enterprise
Intel(R) Core i5-2435M CPU @ 2.40Ghz
8,00 gB RAM
32 Bit
Arkaos Media Master Pro 3.1
Macbook 15" - OSX
Setup that DOES work:
Tiger Touch (Artnet Out)
Arkaos Media Master Pro 3.1
Macbook 15" - OSX
- john rogers
- Posts: 97
- Joined: 18 May 2010, 12:29
- Location: London
- Contact:
-
- Posts: 10
- Joined: 18 Dec 2012, 21:12
- Location: Netherlands
- Contact:
- john rogers
- Posts: 97
- Joined: 18 May 2010, 12:29
- Location: London
- Contact:
-
- Posts: 10
- Joined: 18 Dec 2012, 21:12
- Location: Netherlands
- Contact:
john rogers wrote:One thing to note while we troubleshoot, twelve layers of Media Master in Full mode occupies more than one universe of DMX.
I know, but still, on the Tiger Touch it works, same show on Titan One doesn't work. Also when I start new show on Titan One, I can choose the Active fixture. It is also patched but no way to control it
-
- Posts: 1090
- Joined: 02 Jul 2010, 10:29
- Location: Siegen, Germany
- Contact:
Possibly Art-Net is not configured well in your T1. Please try the following:
- for the moment, forget about 'active fixture'
- simply start a new show, and patch some dimmer channels.
- make sure Art-Net is correctly assigned
- for a MediaMaster Full Mode layer, the dimmer is on #1, while #2 and #3 are for selecting the library and the clip. Can you operate ArKaos this way? I.e. does it react in any way?
- for the moment, forget about 'active fixture'
- simply start a new show, and patch some dimmer channels.
- make sure Art-Net is correctly assigned
- for a MediaMaster Full Mode layer, the dimmer is on #1, while #2 and #3 are for selecting the library and the clip. Can you operate ArKaos this way? I.e. does it react in any way?
-
- Posts: 10
- Joined: 18 Dec 2012, 21:12
- Location: Netherlands
- Contact:
icke_siegen wrote:Possibly Art-Net is not configured well in your T1. Please try the following:
- for the moment, forget about 'active fixture'
- simply start a new show, and patch some dimmer channels.
- make sure Art-Net is correctly assigned
- for a MediaMaster Full Mode layer, the dimmer is on #1, while #2 and #3 are for selecting the library and the clip. Can you operate ArKaos this way? I.e. does it react in any way?
I'll give that one a try, I already tested it with the ENTTEC USB PRO to create a DMX Input on the Media Master Pro 3.1 and I patched a normal fixture on the T1 and that works without problems
Thanks for the support!
Who is online
Users browsing this forum: No registered users and 3 guests