Bpm Timing with fixed strobes

[sdowdesw]

Hi there
I’m new at this forum bit, I’m working titan one system. Can anyone help me I’m trying to see if it is possible to put bpm on a SGM Flasher 1.5 strobe if so How

Thanks

[niclights]

According to the fixture manual the range is 0 to 50 flashes per second which theoretically translates to 0 to 3000 flashes per minute. So you could edit the personality and change the strobe display range to 0 to 3000. I wouldn't rely on this being too accurate though, especially as there are only 256 discreet levels within the range (ie. the actual resolution would have a variance of up to 12 BPM either side of the value set).

[sdowdesw]

thanks for that.now can asign bpm1 master to a cue so if the band is at 25 bpm set my strobe to the same ? if so how

thanks

[niclights]

No. That is not possible, sorry. Speed masters apply to chases and shapes.

[sdowdesw]

thanks for all your help

stuart

[Stavrosg]

If the band is quite consistent and play on metronome you can set different strobes on the beam palletes. Or just mode 2 like a professional busker