Different attributes depending on DMX mode laser
Posted: 02 Mar 2023, 00:37
Hello all,
I have a China 8 DMX channel rgy laser and it seems that it has 2 DMX modi.
Channel 1 controls the mode of the laser eg. off, sound, auto and dmx.
But it seems that on the first channel, I can select not 1, but 2 dmx modi. The first one is from value 150 to 199 and the second mode is from 200 to 255.
If I select value 150 on channel 1, I have a certain amount of patterns to choose from by using values with channel 2.
If I select 200 on channel 1, I also have a certain amount of patterns to choose from with channel 2, but those patterns are different.
Can I do something in the personality builder so that the shown text for the pattern attribute (channel 2) is different depending on the value selected for the control (channel 1)?
I hope this makes any sense. If not, I try to explain better.
I have a China 8 DMX channel rgy laser and it seems that it has 2 DMX modi.
Channel 1 controls the mode of the laser eg. off, sound, auto and dmx.
But it seems that on the first channel, I can select not 1, but 2 dmx modi. The first one is from value 150 to 199 and the second mode is from 200 to 255.
If I select value 150 on channel 1, I have a certain amount of patterns to choose from by using values with channel 2.
If I select 200 on channel 1, I also have a certain amount of patterns to choose from with channel 2, but those patterns are different.
Can I do something in the personality builder so that the shown text for the pattern attribute (channel 2) is different depending on the value selected for the control (channel 1)?
I hope this makes any sense. If not, I try to explain better.