I'm new at forum and writing because have been asked to add two chinese smoke machines with 24 x 3w RGB LEDs to an installation with a Quartz. I don't know how to create a personality with posibilities to handle the color mix , dimmer, etc. as normal RGB light because all LEDs are handle with a single channel ...
The machine is this:
The mapping that brings the "manual":
Channel 1 -> Smoke -> 000-255 -> Smoke 0-100%
Channel 2 -> Reserve
Channel 3 -> LEDs -> 000 -> Off
001-010 -> Auto color change (R / G / B)
011-020 -> Blue
021-030 -> Red
031-040 -> Green
041-050 -> Blue Strobe
051-060 -> Red Strobe
061-070 -> Green Strobe
071-080 -> Blue Fade
081-090 -> Red Fade
091-100 -> Green Fade
101-110 -> Color fade (R / G / B)
111-255 -> Auto color change (R / G / B)
Channel 4 -> Speed -> 000-255 -> Speed 0-100%
Any help will be welcome.
Thanks to all, regards.
Welcome to the Avolites Personality Builder Forum.
2 posts • Page 1 of 1
According to the specs on the linked product page it has 7 channels. But if the mapping in the manual is correct then unfortunately it will not be possible to have dimmer or colour mixing. I would create this as 1 - dimmer (representing the smoke control), 2 - reserved, 3 - colour macro, 4 - speed.
Who is online
Users browsing this forum: No registered users and 3 guests