If I fixture-copy a multicell fixture(Like Clay Paky K20), the fixture which have 1 dmx address goes wrong.
To produce this error.
1) Patch 8 Clay Paky K20 from DMX address 1.
2) Record red and blue playbacks for test.
3) Copy a fixture to another handle. (fixture copy)
4) Repatch the fixture to available address.
5) Fire a playback. Then the first fixture which acquired 1 dmx address goes wrong.
It looks like losing its dmx address. I tested other multicell fixture(ColorStage LED 1912W Zoom) copying. They also went wrong.
But when I patch 8 Clay Paky K20 from DMX address 2, fixture copy works fine.
I don't know this is only my case or not.
Multicell Fixture Copy Issue
Moderator: Moderators
Re: Multicell Fixture Copy Issue
As per my recent email I believe this may be specific to the integrated Capture simulation. Unfortunately there is a fault in the current version of Titan where copying multi-cell fixtures can corrupt fixtures in the Capture theatre. All being well this will be fixed in the next version of Titan.
Or is this happening with real-world fixtures?
Or is this happening with real-world fixtures?
Re: Multicell Fixture Copy Issue
Today I checked it in my club.
Like you said, it only did wrong with Capture.
Real fixtures work right.
Thanks for the answer!!
Like you said, it only did wrong with Capture.
Real fixtures work right.
Thanks for the answer!!
Who is online
Users browsing this forum: No registered users and 9 guests