16Bit Attributes or Coarse / Fine attributes?
Posted: 25 Jan 2018, 15:21
Me again.
Still working on Arri Sky Panel Profiles. Another little query - have I understood this correctly?
There are many modes for example:
Mode 2 8 Bit Dim CCT (correlated Colour Temperature) +/- Green etc
easy!
Mode 7 16Bit Dim CCT +/- Green etc.
Two channels each for 6 Bit functions.
Easy
Now Then:
Mode 9 bit Dim RGBW etc.
Two channels each, while RGBW are placed in the Colour group, I have a 16 bit control for each colour which is placed on the colour mapping display. I can choose colours at random very quickly. All fine and dandy.
But:
Mode 14 - 8 Bit but giving a coarse and Fine control per function:
Dim Coarse
Dim Fine
Red Coarse
Red Fine
Green Coarse.....etc
Stay with me, I guess the idea is to get within a region with coarse, then fine tune with the fine control.
However despite placing all these attributes in the Colour Attribute Group and making sure they are all mapped across pages of C-mix and colour wheels, I am unable to see the colour mixing chart.
Is this possible?
The scenario I am guessing would be to get near to the colour required, and then fine tune with Fine RGBW controls?
Nic Morris I noticed in your personality you have just used a straight 16bit 2 channel per function in Mode 14 for example.
Am I asking too much?
Any comments or suggestions gratefully received.
Still working on Arri Sky Panel Profiles. Another little query - have I understood this correctly?
There are many modes for example:
Mode 2 8 Bit Dim CCT (correlated Colour Temperature) +/- Green etc
easy!
Mode 7 16Bit Dim CCT +/- Green etc.
Two channels each for 6 Bit functions.
Easy
Now Then:
Mode 9 bit Dim RGBW etc.
Two channels each, while RGBW are placed in the Colour group, I have a 16 bit control for each colour which is placed on the colour mapping display. I can choose colours at random very quickly. All fine and dandy.
But:
Mode 14 - 8 Bit but giving a coarse and Fine control per function:
Dim Coarse
Dim Fine
Red Coarse
Red Fine
Green Coarse.....etc
Stay with me, I guess the idea is to get within a region with coarse, then fine tune with the fine control.
However despite placing all these attributes in the Colour Attribute Group and making sure they are all mapped across pages of C-mix and colour wheels, I am unable to see the colour mixing chart.
Is this possible?
The scenario I am guessing would be to get near to the colour required, and then fine tune with Fine RGBW controls?
Nic Morris I noticed in your personality you have just used a straight 16bit 2 channel per function in Mode 14 for example.
Am I asking too much?
Any comments or suggestions gratefully received.