Page 1 of 1
HTP channels for LEDs
Posted: 23 Apr 2016, 07:34
by nishrigo
I came across a very cool feature in the chamsys edit head function, where I can make the colour - RGB, etc as HTP channel instead of the default LTP.
This was very useful when wanting a slow fade from say RED to GREEN going through ambers, and yellows, etc. Would something similar be possible in the Avolites Personality Builder?
Re: HTP channels for LEDs
Posted: 23 Apr 2016, 09:51
by niclights
Which console?
Re: HTP channels for LEDs
Posted: 24 Apr 2016, 03:47
by nishrigo
I was using the onPC version of the magicq software - which runs on all their consoles.
Though Chamsys does not have a personality builder, you can edit personalities in the console and create new fixtures out of that.
Re: HTP channels for LEDs
Posted: 24 Apr 2016, 09:43
by niclights
I meant which Avolites console.
Re: HTP channels for LEDs
Posted: 25 Apr 2016, 09:56
by nishrigo
The console I use is a Pearl Expert.
Re: HTP channels for LEDs
Posted: 25 Apr 2016, 10:09
by niclights
Assuming you're running Titan it is not currently possible to change attributes to HTP. A possible workaround is to set playbacks to mode 2.