I am getting an intermitent problem with the Avo Decoder being used with a FD rack. Upon connecting a DMX line to the decoder the whole rig starts to pulse between about 20%and 40%. In the first instance I cured this by moving the DMX onto line B.
The next day the same problem occured on line B when the decoder was powered up with the DMX already attached. On this occasion the problem
was solved by changing to another DMX line from the desk.
We are running the show on a hog 2. Resetting the desk made no difference and the output was the same when the DMX line was changed over, so I have discounted the desk as a source of the problem.
Could it be the decoder prehaps a loose card, or is the multicore the culprit? any suggestions welcome.
I have the show running ok at the moment so this post is more for personnel intrest than a plea to get me out of the sh1t for the moment at least.
Avo Decoders For FD
Moderator: Moderators
Who is online
Users browsing this forum: No registered users and 43 guests