Gregory wrote:Version 10 onwards requires the Pro upgrade for the Tiger Touch. A basic check is how many network ports there are on the back of the console, Pro consoles will have two. You will also require 4GB of RAM and the UPS board installed, when you run the recovery it will check these things are correct before you install. You should be able to purchase the Pro motherboard upgrade if you need it from your local distributor.
If your console is already compatible you should be able to run the v11.1 recovery and then apply for a new licence, the licence itself should not cost anything. If you wish to upgrade to v12.0/v12.1 you will need to purchase an AvoKey as well.
Tiger touch
Using powerful Titan operating system
DualCore processor, 64GB high-speed SSD, 4GB of memory
Menu display with built-in many languages
A built-in 15.6 inch touch screen HD resolution, which supports the control of various lighting 3D visualization software from th internet to computer
Support Artnet network function
The console comes with 4/8 DMX outputs interfaces
2048DMX channels
Built-in USP power supply, incase of no access to 220V AC, the power supply can operate normally about 1 hour
10 macro function buttons, can edit any program
Putting 20 playback, support more than 1000 virtual replay
Powerful CMY palette
Fast and easy to use graphics generator, classification of built-in graphic easier to use
Support wi-fi access, wireless light control, mobile devices (smart phone, smart tablet) remote control lamps
Built-in lamp library, lamp library editing software
Support MIDI time code sound and light synchronization function.
Size: 650 x 440 x 160 (mm)
My pic