Help with Chauvet Intimidator Hybrid 140SR
Posted: 11 May 2018, 16:49
Hi.
I have a doubt:
Using Chauvet Intimidator Hybrid 140SR in Capture Visualiser and applying PRISM 2 (linear prism) I get this:
Then I apply different PRISM 2 SPIN to the fixtures {Prism 2 = Spin CW / Spin CCW} and go back to "no spin" {Prism 2 = pris}, the fixtures are not aligned, they stop on last rotation position.
Not even going {Prism 2 = open} and {Prism 2 = prism} go back to original aligned position.
Since there is no PRISM 2 INDEXING, I would like to know if is a Capture Visualiser bug or real moving head bug.
Someone who uses this moving head could help.
Titan v10.1 with TitanFixtureLibrary of May 11 2018
Thanks
I have a doubt:
Using Chauvet Intimidator Hybrid 140SR in Capture Visualiser and applying PRISM 2 (linear prism) I get this:
Then I apply different PRISM 2 SPIN to the fixtures {Prism 2 = Spin CW / Spin CCW} and go back to "no spin" {Prism 2 = pris}, the fixtures are not aligned, they stop on last rotation position.
Not even going {Prism 2 = open} and {Prism 2 = prism} go back to original aligned position.
Since there is no PRISM 2 INDEXING, I would like to know if is a Capture Visualiser bug or real moving head bug.
Someone who uses this moving head could help.
Titan v10.1 with TitanFixtureLibrary of May 11 2018
Thanks