Adding a self-made fixture in the visualizer
Posted: 15 Mar 2018, 04:44
1. I recently used a fan-shaped fixture in a venue. It's a moving head and sort like two fixtures combined with two tilt attributes which controls each little fixtures, and there is only one dimmer value attribute and pan attributes. Obviously, I am not aware of its name and it's made by china manufacturer. The manufacturer created its own personality which allows me to control. However, there is no model in the visualizer, so I wouldn't be able to program it back home. I am wondering if it's possible to create a model on your own to see the simulation in the visualizer or it's just too hard to do so?
2. I have another fixture which is a 6ch LED par with dimmer, RGBW, shutter. Since there is no fixture model in the visualizer, I substituted with PAR 64 Short LED (6DMX) which allow to see the simulation. After finishing programming back home, I connected my titan one dongle with venue's DMX line. When I ran the show, LED par came out with wrong color like red become blue, etc. I came up with an idea by editing PAR 64 Short LED personality, but not sure whether it will mess up whole thing or not. Furthermore, will it also correct the output color in the visualizer? Well, another thing is I don't know how to do it. I would like to know how to do it, and if there is another solution to this problem, I am eager to hear.
3. Can I add a bulb or musician 3D model in the Titan built-in Capture visualizer?
4. What's the difference between legacy visualizer and Capture visualizer? I mean I can tell the difference by using it, but I don't know why do people need legacy visualizer when there is capture visualizer, not to mention these two visualizer are not sync together. Perhaps there are some function I don't know?
I am sorry for lots of questions at the same time, but would be really to find out the answers.
MANY MANY THANKS
2. I have another fixture which is a 6ch LED par with dimmer, RGBW, shutter. Since there is no fixture model in the visualizer, I substituted with PAR 64 Short LED (6DMX) which allow to see the simulation. After finishing programming back home, I connected my titan one dongle with venue's DMX line. When I ran the show, LED par came out with wrong color like red become blue, etc. I came up with an idea by editing PAR 64 Short LED personality, but not sure whether it will mess up whole thing or not. Furthermore, will it also correct the output color in the visualizer? Well, another thing is I don't know how to do it. I would like to know how to do it, and if there is another solution to this problem, I am eager to hear.
3. Can I add a bulb or musician 3D model in the Titan built-in Capture visualizer?
4. What's the difference between legacy visualizer and Capture visualizer? I mean I can tell the difference by using it, but I don't know why do people need legacy visualizer when there is capture visualizer, not to mention these two visualizer are not sync together. Perhaps there are some function I don't know?
I am sorry for lots of questions at the same time, but would be really to find out the answers.
MANY MANY THANKS