Pearl Tiger USB Slave

For anything that doesn't belong in the other boards

Moderator: Moderators

Post Reply
CyPleX
Posts: 10
Joined: 07 Jul 2011, 07:48
Location: Enschede, The Netherlands
Contact:
Contact CyPleX

Pearl Tiger USB Slave

Postby CyPleX » 10 Jun 2012, 15:09

I have been searching for this item on the forum but havend find any information.

That why i ask it here.
What is the funtion of the USB Slave Port on the back of the Pearl tiger 2008?
To beam or not to beam, thats the question..
Top
CyPleX
Posts: 10
Joined: 07 Jul 2011, 07:48
Location: Enschede, The Netherlands
Contact:
Contact CyPleX

Postby CyPleX » 06 Jul 2012, 12:06

23 viewers but no reaction?
To beam or not to beam, thats the question..
Top
icke_siegen
Posts: 1088
Joined: 02 Jul 2010, 10:29
Location: Siegen, Germany
Contact:
Contact icke_siegen

Postby icke_siegen » 06 Jul 2012, 17:09

Sorry mate, this port has no funtion. In the manual it's stated that this port is reserved for future software versions - but this never happened. It's as like as stated elsewhere: when designing the hardware, one usually does so with possible future extensions in mind, to avoid the necessity of future hardware changes. And often enough this turns out to be quite usefull. But sometimes it doesn't.
Top
CyPleX
Posts: 10
Joined: 07 Jul 2011, 07:48
Location: Enschede, The Netherlands
Contact:
Contact CyPleX

Postby CyPleX » 06 Jul 2012, 21:17

to bad i had a little hope for a master slave function
To beam or not to beam, thats the question..
Top
Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 10 guests