Art2000 Wiring

[Tumbleweed]

How are the legs distributed on the Art2000 dimmers?

Like, is dimmer 1 on the black leg, dimmer 2 on the red leg, and dimmer 3 on the blue leg? Or, is it wired in some weird British fashion that would make Mr Lucas proud (heh heh)

I'm popping breakers on my Art2000 rack, so I have to repatch the whole shebang (I swapped modules around, this didn't fix the problem, I redid the hard patch, the same breakers blew), and when it gets repatched, i still need to balance the load on the mains....

[icke_siegen]

The manual states (and I guess the front is labeled ackordingly):

L1 (red): 1, 4, 7, 10
L2 (yellow): 2, 5, 8, 11
L3 (blue): 3, 6, 9, 12

[Tumbleweed]

found out that L2 is split on two breakers, 2 and 5 are on one, 8 and 11 are on the other.

all my pars are now spread out as evenly as possible across all three legs

[icke_siegen]

Hm, to me this indicates some strange faulty wiring inside the dimmer module. I strongly suggest contacting Avo service