Files sent.

For all curious: export R20 files works only if modes are created and a proper Pearl Reference name is given per mode.

Please check if the file functions properly, and if so let's submit it for including into the standard library.

It was an Awakening LED Wash Mover...

Wow, that's really not too easy. At least you have found out the main obstacles. Yes, since the Colorblast doesn't feature a main dimmer, and the classic desks don't feature a virtual dimmer, you have to find your ways around this. If you want, we'll might help you loading a personality first, but y...

Hard to tell.

If you send me the d4 (and the wheel mapping, if you saved it) by email (s.beutel at avolites.de), I'll see what I can do.

The Vis connector: you can connect the desk to an external PC running ACDI and Visualiser. Smae thing like before, but no you can use a straight serial cable, without the need for those MIDI-to-Serial adaptors. USB: this might stem from the B3 being used in the Pearls as well, but I doubt USB being ...

¿Qué hace exactamente el escritorio que usted pide? No fue sino hasta el 4 versio que usted necesita un código de activación, que era el código 6digit en la pequeña etiqueta. Desde la versión 5 en adelante, sólo es necesario el número de serie. ¿Qué manera de actualizar el escritorio? Só...

Find the manual here: http://www.colorkinetics.com/support/datasheets/ColorBlaze_TRX_ProductGuide.pdf To enable the intensity channel: 1. Select Configuration > Intensity Channel. 2. Select Enabled. 3. Press Enter to confirm your selection. If you really need a master fader, you need to make use of ...

Since they don't appear to have a master dimmer - unless I'm missing it How did you patch them? They do have a master dimmer. But this sounds more like you used some RGB-/LTP only personality. Also - Is there a way to treat the roller bar pages 1A, 1B, etc as pile ons instead of a crossfade? I gues...

Could you please be a little more specific? - with which program do you have this problem, and in which situation (I just guess you're trying to get the Titan Simulator running) - what is your operating system? Does it say 'not installes' or 'not running'? If not installed, the best thing is to remo...

No, there is no Mac version of any of those programs. Try running it via Bootcamp (which will probably work) or via the standard windows desktop virtualisations (not sure if this will work)

Short answer: do nothing, just fire the playback. If you called the palette with timing, it doesn't go into the programmer. Or: simply hit clear, as discussed in our posts. This will make sure the programmer gets cleared, and depending from mentioned settings, LTP channels will remain unchanged desp...

Oops, that's new to me. May I suggest to mention this in the manual?

Program a memory only for the dimmer channels, and bring up your lights there. Then you can happily busk along, and press CLEAR whenever needed. The fixtures should remain on, without any visible changes. You might wish to have a look at the Clear options (whilst <Clear> is pressed), see manual sect...

Hi Tim, no, that's not possible; you can control only buttons/switches/faders where you can store something on, not the programming section. Furthermore, in order to acchieve what you want, you'd need to connect the external device to the simulator somehow; but MIDI over USB or network is not suppor...

Unfortunately, the answer is a straight NO. In the Tiger Touch, the desk light is fed directly from the PSU, with no dimmer or whatsoever in between. Sorry guys (have to fall back to the old trick: some tape, and some 119, 120, 195 or whatever gel at hand)

and two more by niclights: http://avolitesshop.co.uk/phpBB3/viewto ... =7503#7503