Hi all,
I still haven't taken the plunge with Titan v9...how ready is the current release for running shows?
Search found 68 matches
- 02 Jun 2015, 20:37
- Forum: Avolites Consoles
- Topic: v9 - how show-ready is it?
- Replies: 2
- Views: 2999
- 14 Apr 2015, 12:41
- Forum: Avolites Consoles
- Topic: Updating palettes > cues
- Replies: 3
- Views: 3591
Re: Updating palettes > cues
Thanks Nic, I'll go through a bit later and check that the palette references have saved with the cues. Yes I did merge the new positions into the existing palettes...or replaced them if they were normal palettes. Can I ask...there isn't a setting to tell the desk to link cues to palettes as we're t...
- 14 Apr 2015, 08:21
- Forum: Avolites Consoles
- Topic: Updating palettes > cues
- Replies: 3
- Views: 3591
Updating palettes > cues
Sorry, this is going to be a very basic question!... I've almost finished pre-programming my next show. Was in the theatre yesterday and updated some position palettes, but when I ran the cues later that contained the updated palettes the positions were still the wrong (the pre-programmed ones). I'm...
- 20 Mar 2015, 07:30
- Forum: General Discussion
- Topic: Multiple versions of titan suite on the same computer ?
- Replies: 10
- Views: 10156
Re: Multiple versions of titan suite on the same computer ?
Thanks Nic, I get that now, but new users (like me) may not, and may upgrade without realising the difficulties they're potentially heading into. If I had done work on a current show file, upgraded and then had issues I would be more than a little p'd off!!! Anyway, I'm looking forward to the v9 pro...
- 19 Mar 2015, 15:44
- Forum: General Discussion
- Topic: Multiple versions of titan suite on the same computer ?
- Replies: 10
- Views: 10156
Re: Multiple versions of titan suite on the same computer ?
Sure, it isn't a bug, and yes, RC should ring warning bells (it does with me which is why I asked my question before installing anything!). I do think that there should be a warning to not install a major update/RC until you are happy it'll work for you, as it's hard to revert back and they can't in...
- 19 Mar 2015, 13:41
- Forum: General Discussion
- Topic: Multiple versions of titan suite on the same computer ?
- Replies: 10
- Views: 10156
Re: Multiple versions of titan suite on the same computer ?
I appreciate it may be technically challenging to run versions side by side, but to publish an RC without the ability to use that and a production version alongside each other is really not good at all. I don't remember seeing any warning on the website or release notes about this...what happens if ...
- 19 Mar 2015, 13:10
- Forum: Avolites Consoles
- Topic: Install Titan 9RC as separate installation
- Replies: 1
- Views: 2383
Install Titan 9RC as separate installation
Hi someone at Avo technical please tell me if it's possible to install Titan 9 Release Candidate alongside a production version of 8.1, so they don't interfere with each other? I've got shows coming up in the next few weeks...don't want to use a RC version (I can wait for the production release of 9...
- 23 Jan 2015, 21:35
- Forum: Avolites Consoles
- Topic: Titan 8.1 & Titan Mobile on a Microsoft Surface Pro?
- Replies: 0
- Views: 3715
Titan 8.1 & Titan Mobile on a Microsoft Surface Pro?
I'm wondering how successful or otherwise running Titan 8.1 on a Microsoft Surface Pro might be?
Is anyone doing this? If 'yes' and it's working OK, which model of Surface are you using?
Is anyone doing this? If 'yes' and it's working OK, which model of Surface are you using?
- 21 Jan 2015, 15:34
- Forum: Avolites Consoles
- Topic: Checking Titan Mobile firmware version
- Replies: 2
- Views: 3445
Re: Checking Titan Mobile firmware version
Yes, June was a typo.
Thanks.
Thanks.
- 20 Jan 2015, 18:08
- Forum: Avolites Consoles
- Topic: Checking Titan Mobile firmware version
- Replies: 2
- Views: 3445
Checking Titan Mobile firmware version
Hi, I received my replacement Mobile today - was surprised that I still needed to update the firmware with USB Expert Console before Titan would find it (I thought a brand new desk would have latest firmware already installed - it's serial number 2482?). Titan and the desk now talking to each other ...
- 19 Jan 2015, 09:57
- Forum: Avolites Consoles
- Topic: Midi mapping not working on Titan Mobile
- Replies: 2
- Views: 3055
Re: Midi mapping not working on Titan Mobile
I checked using USB Expert and couldn't see any update messages.
The desk is being swapped out tomorrow as there's another issue with it (the case), so I'll wait and see if the problem exists on the new one as well. If it does it'll be a software issue...hopefully it'll just go away!
The desk is being swapped out tomorrow as there's another issue with it (the case), so I'll wait and see if the problem exists on the new one as well. If it does it'll be a software issue...hopefully it'll just go away!
- 16 Jan 2015, 23:35
- Forum: Avolites Consoles
- Topic: Midi mapping not working on Titan Mobile
- Replies: 2
- Views: 3055
Midi mapping not working on Titan Mobile
Hi, I'm running Titan 8.1 on Windows 7 on my MacBook Pro (booted directly into Windows), with a Titan Mobile. My colleague is running Windows 7 and Titan 8.1 (on his rack style dedicated show PC) also with Titan Mobile. He's written some time coded cues for our next show, running with Q-Lab on his M...
- 04 Jan 2015, 21:05
- Forum: Avolites Consoles
- Topic: Connecting Titan Mobile to Capture
- Replies: 20
- Views: 16066
Re: Connecting Titan Mobile to Capture
Or, add a section into the manual (or a separate document to download from avolites.com) on connecting to visualisers, and specify the step I missed in the instructions!
Seems obvious now I know what I was missing, but at the time it was very frustrating!
Seems obvious now I know what I was missing, but at the time it was very frustrating!
- 31 Dec 2014, 14:58
- Forum: Avolites Consoles
- Topic: Connecting Titan Mobile to Capture
- Replies: 20
- Views: 16066
Re: Connecting Titan Mobile to Capture
Just for info in case anyone else has the same newbie problem in the future, I know why this wasn't working... In the Art-Net properties (clicking the i against Art-Net on the left side of the DMX settings window) I hadn't selected the correct network adaptor in the pane at bottom-right - as soon as...
- 24 Dec 2014, 14:47
- Forum: Avolites Consoles
- Topic: Colour shape on LEDs - incorrect colours
- Replies: 1
- Views: 2410
Colour shape on LEDs - incorrect colours
I have a couple of LED battens and 4 old Eurolite LED pars in my dining room, whilst I'm getting to grips with Titan. I've tried to program colour shape...most work fine, but if I choose the Red+Blue or Blue+Green shapes the output from the fixtures is very wrong...I get various very pale shades, fo...