icke_siegen wrote:Yes, the macros are stored in the showfile and transfer with it, without the need to copy the macros. This is true for recorded as well as for programmed macros. I just tried this - no problem at all.

Thank you very much for the quick answer.

Hello all,

When programming a show on a pc or just any Titan desk and using custom macros in that show. When I save the showfile on a USB stick and load the show into another desk, will the macros also be present in the show on that desk or do I need to transfer any macros manualy?

Well, i found something with what seems to match the recommended specs, but it is an older machine. Do I run into trouble or will this run just fine even when expanding the show/new updates of Titan? The machine: HP Elitedesk Pro G2 Mini Intel i7 2.8GHz 6700 6th generation 8 or 16 GB RAM 250GB SSD W...

Hello all, For a small touring show, we are building a Titan Two PC based desk. Consisting a PC, touchscreen and some midi controllers. The show has 8 moving lights, 12 static RGB fixtures, some dimmers and 8 25 pixel RGB matrix panels with simple pixel mapping. Total channels used will be close to ...

To kick this topic: I want to do the same, but we hooked up 2 co2 valves to a dimmerpack and have a flash cue wich just full on open te valves when pressed, but if we use the group master as safety channel, it also haa to function as relay instead of dimmer. Can we set the group master to be full on...

Hello all, I have problems to have the bpm tap tempo linked to a button on my midi controller. I can have the normal playback swap button linked to my midi controller, but when I make that as my bpm master, it does strange things. When I tap the button, it jumps to the highest bpm, it wont act as ta...

Clear answer. Thank yoy for that. The reason I asked was: I would like to show others a bit of how a laser would sit in the show, but I guess I need a full BEYOND license plus having to buy the FB3 or FB4. That is a bit too much for me and had hoped there would be another way to get a simple laser d...

On the personality website of avolites, I see a few DMX laser personalities available for the visualizer. What do they do in the visualiser? Also, I know I can do ILDA style projections in Capture, but I need a full version of BEYOND to do that AND an FB3 or FB4. I was wondering if Capture is able t...

So they are supported in the full/demo/separate version of capture, just not the intergrated version?

Hello all,

I own 3 simple lasers and want to pre-build a demo show for a charity event. Does the build in Vis of T1 Sim and/or Capture (demo) show the laser beams of DMX controlled lasers, like the Laserworld CS 400G (which has a visualizer personality)?

Thank you for all the help. Yes Realizzer responds to tilt changes in T1 Sim. I will contact them if I can't fix that with the fixture builder from Realizzer. One last question I can get an answer on and is totaly off from this topic, but: I have an effect created as following: - keyframeshape with ...

Thank you for your qiuck reply. What do you mean by: "If tilt is responding"? If I have the position I mentioned and make another position with the tilt opposite of the previous position, the tilt in Realizzer is changing exactly the oposite of the build in Capture Vis. If I remember this ...

Anyone?

Hello all, does anyone have experience with Realizzer 3D? I have a few Rush MH2 position pallettes and all programmed with the build in Vis. When I send the DMX signal to Realizzer via Artnet, the position is off, the pan is correct, but the Tilt is incorrect. Example: the 4x MH2 hanging on a truss ...

Hello all, At the moment I busk a lightshow at a Dancing. I do use a "bpm flash" effect. The lights will flash on and fade out almost instantly, controlled with a bpm master. Now it's done by a keyframe shape effect with 2 frames. Dim full and dim zero. The dim full has a "easy both&q...