for v10.1 it needs to be atlas exported..

keep it simple remember the console does nato have a super powerful vid card. all layers will be smooshed into one.

plug the USB into a different port this will sometimes break the windows lock on using it on both screens.

delete the shutdown show file . The file can be found in Windows Explorer by typing %appdata%\Avolites\Titan\10.1.96.5 in the address bar, alternatively browse to C:\Users\<username>\AppData\Roaming\Avolites\Titan\10.1.96.5 replacing <username> with the name of your user account. The file to delete ...

if you go to the system menu ( avo + disk ) and look there you will find the re license unless you are on a full already . it will be on the last page of the system menu stuff ( under the external display )
you should be able to export a new token there and submit a request for a full license.

The switch is for future use

only one wing is supported at this time.

Location and willingness to ship internationally would be good to add .

you just run the recovery . it installs the os and everything.

download the recovery creator make a thumb drive from it and install the whole thing. also run ecn-204 all of this is downloadable from avo's site

disable any and all anti virus and reinstall the PC suite

i made the overlay available again in the links i posted before

Does the console have 2 ethernet ports ? If so it does have the pro upgrade and is able to run V 10 . If it only has 1 it does not have the upgrade and is not able to run V10 . and will require the full kit. if it does have both the hard drive should have been upgraded when the kit was installed. Yo...

known bug in capture .. if you open the capture vis.. and do anything inside it then close it and try to patch a fixture they do not appear. you can "dummy patch" a fixture with the capture window open and all of them will appear ( you can then delete the dummy fixture) or you can open cap...

There seems to be an odd bug in highlight where they seem to get stuck in highlight .. reselect turn highlight on and off again and you are good to go .

might be a BIT slow but will likely be OK

tho
SSD is REQUIRED for V10+

you create your own USB, the oldest available is v8.

You may want to upgrade the RAM of the console and make sure all the ECN's have been performed

DO NOT install Antivirus on consoles .