Hi, I have a quartz currently on V11.3. I want to upgrade to v13, but with the ability to switch back to V11.4 (yes four) as I have some clients out there with 11.4 and want to be able to edit shows and transfer them over. I have an avokey for my quartz, but not yet activated as yet. Is this possibl...

Hey, excited to see the recent newsletter showing the pioneer DJ link being demonstrated at Namm....

Don’t suppose you’d like a beta tester for this feature? I’d be happy to help.

Can I jump in here and ask, is there a way to have the “tap” button also send out a dmx signal?

Basically I want to tap the tempo on my Titan mobile and also use this tap to set the tempo on resolume arena. So I’d need a 0-255 change on each tap on a single dmx channel.

Are usb midi controllers only supported on v12? Or is there a way to get them to work on V11.4? I’m Using either a Titan mobile and a quartz.

Maybe I should look around my start menu more often.... amazing what you find....

I miss windows XP. Lol.

Is there a way to bring up an on-screen controller for Titan Mobile? The situation I have is that I’d like to be able to Remote Desktop/TeamViewer into a remote PC running Titan mobile to make changes to the programming etc. It works fine for me to do this, by running the simulator, but the problem ...

Having thought more about this, is it that the position pallette can only store the core pan/tilt values rather than cell values? I Tried storing to the beams pallette, but this doesn’t work either. One other point of note, is that the blue arrow on screen above the wheel values (below the FX functi...

Just discovered something odd. I have a Rogue R1 FXB which is a moving head with 5 independent tilt heads. I can adjust each of the 5 head tilt positions in the attribute editor, and offset each head by a few degrees. I can then store this offset tilt head position as a position palette. Now, if I c...

I have had an Avokey on order with one of your distributors (LT) for 3 weeks now... you’re out of stock apparently... keen to upgrade to v12 ASAP... will I get a grace period before the Avokey is required in my Quartz?

Furthermore, will a T2 fix this issue running v12?

Ok, can you confirm if this system render rate will fix this issue?

If you can’t confirm this, if I was to test with a quartz running V12, will that confirm it’s for me? Or is the DMX output of a quartz different to that of Titan one?

Not on v12 unfortunately.... will this be in the next 11.x update?

I am having trouble with a Titan one and some Chauvet Qwash 419Z lights. They flicker (to black) for a few milliseconds every couple of minutes randomly. I have tried enabling the Stop Bit, and changed the break length to loads of different values ranging from 200 up to 6000 and they still flicker. ...

I’m not at my desk at the moment, but if I recall, I recorded a simple color wheel step change with one fixture, and about 9 steps. Recorded this cue list to a touch button. I then link copied it to an executor, and the legends did not copy. I then edited the touch button by using “unfold”. I append...

11.3