Search found 4243 matches

by niclights
08 Mar 2020, 16:39
Forum: Avolites Consoles
Topic: Quartz and Two versions of Titan...
Replies: 6
Views: 329

Re: Quartz and Two versions of Titan...

As far as I know there are no other spare slots inside. I have one plugged in the back but if you're using that you will need to add a hub.
by niclights
08 Mar 2020, 10:55
Forum: Avolites Consoles
Topic: Problem with subfixtures
Replies: 1
Views: 87

Re: Problem with subfixtures

Yes, unfortunately this is a bug at the moment with multi-cell fixtures (it is not related to virtual dimmer). The workaround is to record the dimmer from the cell instead.
by niclights
07 Mar 2020, 22:13
Forum: Avolites Consoles
Topic: Quartz and Two versions of Titan...
Replies: 6
Views: 329

Re: Quartz and Two versions of Titan...

Yes. 'One historical version maintained' means the highest version prior to running the v12.0 recovery will be available afterwards. If you have 11.3 and 11.4 installed before running the v12.0 recovery you will have 11.4 as well as 12.0 afterwards but not 11.3. If you only had 11.3 before running t...
by niclights
07 Mar 2020, 21:00
Forum: Avolites Consoles
Topic: Quartz and Two versions of Titan...
Replies: 6
Views: 329

Re: Quartz and Two versions of Titan...

Yes. You just need to install in ascending version order.

Install 11.4, then 12.0 recovery then 13.0 installer. This will give you 11.4, 12.0 and 13.0. Personally I would also install 12.1 after 12.0 recovery (before 13.0) so you have that too in case you need it.
by niclights
09 Feb 2020, 19:29
Forum: Avolites Consoles
Topic: Titan Simulator Internet Activation
Replies: 3
Views: 415

Re: Titan Simulator Internet Activation

Try using manual activation instead.
by niclights
04 Feb 2020, 20:22
Forum: Avolites Consoles
Topic: Internal Visualizer not showing up
Replies: 1
Views: 1007

Re: Internal Visualizer not showing up

It sounds like either the window is opening on a second display that you cannot see/ is not connected or that the macro executor has been changed to do something else. If you are using one display you can try going to System -> [Display Setup] and toggle external display to disconnected if it isn't ...
by niclights
23 Jan 2020, 16:41
Forum: Avolites TitanOne Support
Topic: Moving edge pixelmapper
Replies: 5
Views: 613

Re: Moving edge pixelmapper

Apologies. I rushed that and didn't read it properly before. There are probably a number of ways of going about this but my solution is along the lines of my first suggestion (ie. still a single horizontal line) but with a group containing just the cells involved. There are also a number of ways of ...
by niclights
23 Jan 2020, 11:50
Forum: Avolites TitanOne Support
Topic: Moving edge pixelmapper
Replies: 5
Views: 613

Re: Moving edge pixelmapper

Create a layout with all of the strips in a single horizontal line in the correct order and then apply an element with an animation running left->right.
by niclights
23 Jan 2020, 11:05
Forum: Avolites Consoles
Topic: Excluding a set of fixtures from a swop
Replies: 6
Views: 896

Re: Excluding a set of fixtures from a swop

The programmer should still take priority unless the playback priority is set to 'Very High'. However, I do agree it would be useful to have a separate option if for no other reason than to make it simpler. This would probably also raise the question whether there should be a separate 'exclude from ...
by niclights
22 Jan 2020, 11:53
Forum: Avolites Consoles
Topic: Excluding a set of fixtures from a swop
Replies: 6
Views: 896

Re: Excluding a set of fixtures from a swop

Everything sounds correct and this works when I test. Note that if the house light playback is active when you change the priority you need to kill and refire before it obeys the new priority.
by niclights
17 Jan 2020, 17:12
Forum: Avolites Consoles
Topic: Playback Modes
Replies: 2
Views: 256

Re: Playback Modes

You could try two step cuelists set to fire first cue and manual crossfade where the first cue contains just one colour component at full and the second cue at zero.
by niclights
16 Jan 2020, 16:06
Forum: Avolites TitanOne Support
Topic: difference in behaviour between preset palette and self-created palette
Replies: 1
Views: 187

Re: difference in behaviour between preset palette and self-created palette

It sounds like your palettes don't contain all of the controls. If you are quick recording the palettes by double-tapping on an empty handle in the Colours window by default the record mode is set to 'Mixed' which will record the current value for all colour controls, regardless of whether they are ...
by niclights
10 Jan 2020, 19:15
Forum: Avolites Consoles
Topic: Avolites T1 / Midicon 2 ?
Replies: 1
Views: 223

Re: Avolites T1 / Midicon 2 ?

MIDI is not enabled on the T1. For MIDI you need a T2 or above.
by niclights
07 Jan 2020, 15:42
Forum: Avolites Consoles
Topic: pixel mapper layout
Replies: 7
Views: 973

Re: pixel mapper layout

Another option might be to use the rotation control. If you toggle the Layout Editor context menu option to 'Wheels Rotate Selection' you can flip an entire selection using the Rotation contol by rotating it 180°. For example if you select and rotate 1 2 3 4 5 6 7 8 by 180° it will become 8 7 6 5 4 ...
by niclights
01 Jan 2020, 13:26
Forum: Avolites Consoles
Topic: Chase Fixture Overlap Issue.
Replies: 1
Views: 369

Re: Chase Fixture Overlap Issue.

Confirmed. Devs see #83312.