As described, unplugging ribbon cables to the fader boards to isolate where the fault is coming from is a good idea. It could be one PCB causing the problem. Also there are quite a few chips on the analoge board that can be swapped with each other to see if the problem moves or changes. The best pla...

Yes you can swap map cards. There are some small differences between the cards and you will notice different software versions are available here: http://www.avolitesdownload.com/Downloads/Diamond3.stm You shouldnt have any problems provided you have the extended memory on both cards and you back up...

Hi Mikey, The black surround is attached to the top panel not to the bottom as it is in the touch panel version of the azure. There should be no front panel bending! 3.use the 'on' button above the encoder wheels to on/off attributes! Please feel free to ring me at Avolites in office hours if you ne...

1. Glowing 100%? Check all cables and chips are fully inserted. In 'Avo' mode see diagnostics page to see if the leds still glow when not selected. 2. POWER DOWN FIRST! Stand the desk on the back panel and prize it apart using a tool, lightly levering it open with the small holes in the front. 3. Re...

If you need some information on fitting new video cards you can contact the Avolites service department-020 89658522. We can supply you with a new videocard or direct you to one of our distributors.

http://www.avolites.org.uk/aboutavo/distributors.htm