Search found 79 matches

by TWC
24 Nov 2020, 19:19
Forum: Avolites Consoles
Topic: Unassigned Fixtures From Old Setup
Replies: 1
Views: 21

Re: Unassigned Fixtures From Old Setup

Those unassigned groups... were they originally on a fader? ie the fader was a group master?
by TWC
24 Nov 2020, 19:12
Forum: Avolites Consoles
Topic: Cue List, Midi, audio in
Replies: 2
Views: 166

Re: Cue List, Midi, audio in

Qlab? And use timecode or midi show control cues.

If its a one off its probably easier to use timecode. But if its a complicated show with multiple audio tracks I would always go to midi show control.
by TWC
17 Oct 2020, 12:59
Forum: Avolites Consoles
Topic: Palette filtering when swapping handle worlds
Replies: 2
Views: 234

Re: Palette filtering when swapping handle worlds

it's a regressive issue. it does it in v13 too.

there's something really fishy going on with it.
by TWC
16 Oct 2020, 19:19
Forum: Avolites Consoles
Topic: Palette filtering when swapping handle worlds
Replies: 2
Views: 234

Re: Palette filtering when swapping handle worlds

Some more info relating to this. Show file was created in beta 78 and loaded into beta 90. The RGBL fixtures were patched using citp after the file was imported to beta 90. No patching has been done since the new handle world was created. The new handle world was not a 'blank' world it was based on ...
by TWC
16 Oct 2020, 17:57
Forum: Avolites Consoles
Topic: Palette filtering when swapping handle worlds
Replies: 2
Views: 234

Palette filtering when swapping handle worlds

Hi guys. There seems to be some weirdness happening when you swap handle worlds. All the palette tiles are as if they are filtered. So I have some global colour colour palettes recorded which are for an rgbw fixture and I have an additional fixture group which is RGBL which i want to merge over the ...
by TWC
09 Oct 2020, 22:27
Forum: Avolites Consoles
Topic: Timecode Bug
Replies: 2
Views: 562

Re: Timecode Bug

Have you tried changing the global frame rate in the user settings. Avo+disk, user settings, timecode tab.
by TWC
02 Oct 2020, 19:43
Forum: Avolites Consoles
Topic: Clear 'freeze current values'
Replies: 2
Views: 274

Re: Clear 'freeze current values'

Perhaps it got changed in some version somewhere then. It always used to be that intensities faded out using the master release time irrespective of what mode its set to but I've just not noticed it because I don't use that clear mode too often. Haha I'm an old dinosaur thats been using titan since ...
by TWC
02 Oct 2020, 16:05
Forum: Avolites Consoles
Topic: Clear 'freeze current values'
Replies: 2
Views: 274

Clear 'freeze current values'

hi, theres some strangeness going on with the clear mode when it's set to 'freeze current values'

when you press clear any intensities you have in the programmer are instantly snapping off and following the master release time
by TWC
02 Oct 2020, 09:21
Forum: Avolites Consoles
Topic: Qlab MSC on avo mobile
Replies: 6
Views: 809

Re: Qlab MSC on avo mobile

certain midi show control command types have no affect in titan, they've not been implemented. If you use a go command without setting the cue number field it will just trigger the next cue, or more accurately it has the same affect of just pressing the go The stop command will stop a cue that is cu...
by TWC
02 Oct 2020, 09:00
Forum: Avolites Consoles
Topic: Qlab MSC on avo mobile
Replies: 6
Views: 809

Re: Qlab MSC on avo mobile

What are trying to trigger with MSC in qlab? Cue list? On the avo side 1. Need to set the device ID of the avolites console, somewhat annoyingly this is actually in the timecode section of the user settings. 2. You need to make sure the midi show control mapping is enabled in the triggers sections o...
by TWC
17 Sep 2020, 13:34
Forum: Avolites Consoles
Topic: [Improvement] Pixel Mapper tracking cue list.
Replies: 2
Views: 324

Re: [Improvement] Pixel Mapper tracking cue list.

Really? I didn't know this. :D That's actually quite a major limitation. I'm playing a video clip that's like 2 minutes long and I've got various cues happening throughout video. What's the best workaround for this? Have the Ai clip play in a cue and then add the pixel effect to each intermediate cu...
by TWC
17 Sep 2020, 13:09
Forum: Avolites Consoles
Topic: [Improvement] Pixel Mapper tracking cue list.
Replies: 2
Views: 324

[Improvement] Pixel Mapper tracking cue list.

Hi. Pixel Mapped effects will not track in cue lists, neither when you include an existing effect into the programmer and merge/ or replace that into a cue nor when you create a new pixel effect natively whilst progamming cues. I only tried this with Ai as the source for the effect layer for now, I'...
by TWC
17 Sep 2020, 12:32
Forum: Avolites Consoles
Topic: [Bug] Capture visualiser not working
Replies: 14
Views: 1376

Re: Capture visualiser not working

The driver I have found produces the best results and all round stability for the Intel hd series gpu is 10.18.10.5059 which is dated 16/08/2018. Everything works, internal viz, NDI previews etc etc.

Hope this might help somebody else out in he future.
by TWC
16 Sep 2020, 12:25
Forum: Avolites Consoles
Topic: [Improvement] Trigger mapping
Replies: 2
Views: 311

Re: Trigger mapping

Of course. The obvious answer to having multiple items triggered by the same trigger stimulus is to have multiple trigger maps but I didn't think of this till this morning.
by TWC
15 Sep 2020, 18:43
Forum: Avolites Consoles
Topic: [Improvement] Trigger mapping
Replies: 2
Views: 311

[Improvement] Trigger mapping

I'm not sure if it's a bug or just a quirk of how it works I am using the cheapest nasty manual preset dmx board to trigger some fixtures to set programmer level :D When you start a new map, then click on the + symbol on the right it seems to remember the item that I chose in a previous map that is ...