Search found 55 matches

by htevents
02 Sep 2019, 15:29
Forum: Avolites TitanOne Support
Topic: keyframe shapes act as chase (wait for go)
Replies: 5
Views: 1119

Re: keyframe shapes act as chase (wait for go)

I would recommend using a BPM master to modify the rate of the effect if you want to proceed using a keyframe shape. Yeah, that part was the reasons I wanted to step through the frames manualy, because it is a live band and they don't always stick to the same tempo. Think the effect engine of the s...
by htevents
02 Sep 2019, 12:03
Forum: Avolites TitanOne Support
Topic: keyframe shapes act as chase (wait for go)
Replies: 5
Views: 1119

Re: keyframe shapes act as chase (wait for go)

For this scenario a chase is much easier. Simply recorde only the white steps, set it to wait for go and cue release=On. Not quite, when using keyframes, I only have to set the effect once and just adjust the spread. With A chase, I have to do that 4 times for a 4 step effect and even 6 times for a...
by htevents
31 Aug 2019, 08:58
Forum: Avolites TitanOne Support
Topic: keyframe shapes act as chase (wait for go)
Replies: 5
Views: 1119

keyframe shapes act as chase (wait for go)

Does anybody know if there is an option to get a keyframe shape to wait for go? I have 12 fixtures with colour wheel and want to bumb a colour over the base colour. I can do that very easy with the keyframe shape generator (frame 1 is bump colour and frame 2 is base colour, then set spread to 3 for ...
by htevents
29 Aug 2019, 09:51
Forum: Avolites TitanOne Support
Topic: Update Personality/Visualizer TitanOne
Replies: 1
Views: 486

Re: Update Personality/Visualizer TitanOne

Nevermind, forgot to reboot the software after the update. How stupid of me.
by htevents
29 Aug 2019, 09:47
Forum: Avolites TitanOne Support
Topic: Update Personality/Visualizer TitanOne
Replies: 1
Views: 486

Update Personality/Visualizer TitanOne

Hello all,

I have a show with the CLF Orion patched, but not showing up in the internal visualizer. I now installed the latest personality library and updated the personalities. But still the Orions are not showing up in the internal visualizer. What am I doing wrong?
by htevents
27 Aug 2019, 13:46
Forum: Avolites Consoles
Topic: 8 step colour chase
Replies: 0
Views: 757

8 step colour chase

Dear all, I want to make an 8 step colour chase, where I can top go to jump to the next cue. Is there an easy way to do the following: I have 16 Fixtures (8 with colour wheel and 8 RGB fixtures). Base color is RED and I want White to step (with te go button) over the base colour in 8 steps (so 2 fix...
by htevents
11 Apr 2019, 17:09
Forum: Avolites Visualiser
Topic: Position/orientation of fixture in build in vis titan one
Replies: 3
Views: 2355

Re: Position/orientation of fixture in build in vis titan one

Nic, you are a hero.

I will keep in mind that if the information is not present at Avolites, it can differ from real life positions. If I experience divergence from the real fixture, where can I report it so it can be changed for futere users/updates?

Again, thank you for your help.
by htevents
11 Apr 2019, 08:57
Forum: Avolites Visualiser
Topic: Position/orientation of fixture in build in vis titan one
Replies: 3
Views: 2355

Position/orientation of fixture in build in vis titan one

I would like to know how a fixture is positioned in the visualiser by default. I have a few American DJ RXONE's and can not find out what is the front (display side) and back (connector side), without having the actual fixture with me. Can someone explain how to rotate the fixture to have the displa...
by htevents
08 Apr 2019, 16:40
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 1710

Re: V10 question: hold cue in cue list

Thank you Nic, I did come a little closer to what I want. I have 41 flash moments in the cuelist, so 82 cue's. Cue On (led par flash) and Cue Off (led par dim @zero), all 41 times. I do want the following (times are correct now that I know the last value are the frames and I have a range of 24 frame...
by htevents
08 Apr 2019, 13:01
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 1710

Re: V10 question: hold cue in cue list

Anyone? Show has to be finished this week and I am stuck.
by htevents
06 Apr 2019, 12:59
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 1710

Re: V10 question: hold cue in cue list

Thank your Gregory for your fast response. Option 2 sounds the best for me. Aditional question: how can I create flashes in a cue list. The times are as following: - At 9 seconds, a flash has to fire with a duration of 0,100 seconds (so cue ends at 9.1 seconds) - At 9.5 seconds, another flash has to...
by htevents
06 Apr 2019, 09:48
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 1710

V10 question: hold cue in cue list

Hello, could not find the anser, so asking it here now. I want to have a cue list (to control it by time code) and want a dimmer shape cue running until I want it to end, but certain cue's have to run between the start and end of the dimmer shape. Situation: A sound track is playing. From the start ...
by htevents
28 Mar 2019, 07:35
Forum: Avolites TitanOne Support
Topic: White Flash over colour (LED fixture) timed
Replies: 3
Views: 1632

Re: White Flash over colour (LED fixture) timed

You can set the number of beats per cycle of the key frame shape, by default it is one beat per cycle. But I don''t see how that immitates as an "empty" keyframe with no info in it (like you can do with a chase), so the fixtures will release their colour back to the initial colour (select...
by htevents
27 Mar 2019, 12:57
Forum: Avolites TitanOne Support
Topic: Pixel mapper control dimmer, not colour
Replies: 2
Views: 1373

Pixel mapper control dimmer, not colour

I know this is asked in some topics already, but I couldn''t find a satisfying answer. I am running Titan V10.1 and have a few fixtures. Some spot moving heads and some RGB led par fixtures. I want to create an effect as following: a "bar" that moves diagonal across the fixtures. This shou...
by htevents
20 Mar 2019, 11:51
Forum: Avolites TitanOne Support
Topic: White Flash over colour (LED fixture) timed
Replies: 3
Views: 1632

White Flash over colour (LED fixture) timed

Hello all, I couldn''t find it here, but I want to create a White Flash over colour fx controlled by the BPM master, but with fade in/fade out offset. What I mean is: It should be 2 steps. Step 1 with colour white, step to with "nothing" to release the wite color. I can do this in a chase,...