Search found 49 matches

by htevents
11 Apr 2019, 17:09
Forum: Avolites Visualiser
Topic: Position/orientation of fixture in build in vis titan one
Replies: 3
Views: 1486

Re: Position/orientation of fixture in build in vis titan one

Nic, you are a hero.

I will keep in mind that if the information is not present at Avolites, it can differ from real life positions. If I experience divergence from the real fixture, where can I report it so it can be changed for futere users/updates?

Again, thank you for your help.
by htevents
11 Apr 2019, 08:57
Forum: Avolites Visualiser
Topic: Position/orientation of fixture in build in vis titan one
Replies: 3
Views: 1486

Position/orientation of fixture in build in vis titan one

I would like to know how a fixture is positioned in the visualiser by default. I have a few American DJ RXONE's and can not find out what is the front (display side) and back (connector side), without having the actual fixture with me. Can someone explain how to rotate the fixture to have the displa...
by htevents
08 Apr 2019, 16:40
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 706

Re: V10 question: hold cue in cue list

Thank you Nic, I did come a little closer to what I want. I have 41 flash moments in the cuelist, so 82 cue's. Cue On (led par flash) and Cue Off (led par dim @zero), all 41 times. I do want the following (times are correct now that I know the last value are the frames and I have a range of 24 frame...
by htevents
08 Apr 2019, 13:01
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 706

Re: V10 question: hold cue in cue list

Anyone? Show has to be finished this week and I am stuck.
by htevents
06 Apr 2019, 12:59
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 706

Re: V10 question: hold cue in cue list

Thank your Gregory for your fast response. Option 2 sounds the best for me. Aditional question: how can I create flashes in a cue list. The times are as following: - At 9 seconds, a flash has to fire with a duration of 0,100 seconds (so cue ends at 9.1 seconds) - At 9.5 seconds, another flash has to...
by htevents
06 Apr 2019, 09:48
Forum: Avolites TitanOne Support
Topic: V10 question: hold cue in cue list
Replies: 5
Views: 706

V10 question: hold cue in cue list

Hello, could not find the anser, so asking it here now. I want to have a cue list (to control it by time code) and want a dimmer shape cue running until I want it to end, but certain cue's have to run between the start and end of the dimmer shape. Situation: A sound track is playing. From the start ...
by htevents
28 Mar 2019, 07:35
Forum: Avolites TitanOne Support
Topic: White Flash over colour (LED fixture) timed
Replies: 3
Views: 742

Re: White Flash over colour (LED fixture) timed

You can set the number of beats per cycle of the key frame shape, by default it is one beat per cycle. But I don''t see how that immitates as an "empty" keyframe with no info in it (like you can do with a chase), so the fixtures will release their colour back to the initial colour (select...
by htevents
27 Mar 2019, 12:57
Forum: Avolites TitanOne Support
Topic: Pixel mapper control dimmer, not colour
Replies: 2
Views: 517

Pixel mapper control dimmer, not colour

I know this is asked in some topics already, but I couldn''t find a satisfying answer. I am running Titan V10.1 and have a few fixtures. Some spot moving heads and some RGB led par fixtures. I want to create an effect as following: a "bar" that moves diagonal across the fixtures. This shou...
by htevents
20 Mar 2019, 11:51
Forum: Avolites TitanOne Support
Topic: White Flash over colour (LED fixture) timed
Replies: 3
Views: 742

White Flash over colour (LED fixture) timed

Hello all, I couldn''t find it here, but I want to create a White Flash over colour fx controlled by the BPM master, but with fade in/fade out offset. What I mean is: It should be 2 steps. Step 1 with colour white, step to with "nothing" to release the wite color. I can do this in a chase,...
by htevents
12 Mar 2019, 11:49
Forum: Avolites TitanOne Support
Topic: record dmx output
Replies: 3
Views: 698

Re: record dmx output

Can''t this be achieved by recording in Stage mode rather than Channel or Spot mode? I thought this will record every value that is outputting. Correct me if I''m wrong.
by htevents
12 Mar 2019, 11:16
Forum: Titan Macro Library
Topic: Sharing: a macro to change your color chase
Replies: 15
Views: 6647

Re: Sharing: a macro to change your color chase

Sorry for bumping an older topic, but I run into a problem. I want to make a chase with odd/even fixtures with only one colour over the selected palette colour (step 1 is odd fixtures to selected colour and even fixtures have no colour info (OFF), so the palette colour. Step 2 is even fixtures to se...
by htevents
27 Feb 2019, 09:56
Forum: Avolites Personality Builder
Topic: Updating personality used in show
Replies: 6
Views: 809

Re: Updating personality used in show

Never mind, capture wasn''t updating automaticly
by htevents
27 Feb 2019, 09:26
Forum: Avolites Personality Builder
Topic: Updating personality used in show
Replies: 6
Views: 809

Re: Updating personality used in show

Faced a new problem. It looks like the Beamz MadMax25 COB has no capture link anymore after I updated to the last library. I am using Titan V10.1. Can you confirm that or can it be tha I am doing something wrong or is it just me still working on V10.1? I don't want to update because of the desk of t...
by htevents
26 Feb 2019, 11:42
Forum: Avolites Personality Builder
Topic: Updating personality used in show
Replies: 6
Views: 809

Re: Updating personality used in show

Thanks again Nic. Will try or request with proper documentation.
by htevents
26 Feb 2019, 11:09
Forum: Avolites Personality Builder
Topic: Updating personality used in show
Replies: 6
Views: 809

Re: Updating personality used in show

Thanks Nic for the quick answer. If I choose the ADJ Pocket Spot as basic in the personality builder and I save it under a different name after making the changes, how to create/export the internal capture vis file for the new fixture?