Thanks both for your help.
Cheers

I was trying to free up a fader and put the rate master in playback window and use tap as my speed control. Just trying it on a playback fader to work it out first.
I'm probably looking at it the wrong way and should keep to a fader for movement/shape speeds and BPM in playback window for other stuff?

TT2 V11.1 I have rate master 1 on a playback fader and blue button shows TAP. I can't get this to do anything. Flash (grey) makes it jump to 100% and fader works 0-100% but can't tap. Any ideas? Also, (this may be a feature request) can I make the TT2 Grand Master fader something else? I'd like it t...

This works great. Thanks.

Hi, I'm sure this should be simple but......... I have a show programmed and cues include various combinations of generic dimmer red,green & blue washes. When programming, there were 10 dimmers that made up the red wash, 10 for green and 10 for blue. I move to a new venue and there are now 12 di...

Thanks. I always used mode 2 on classic but understood that size/speed on fader is a better option on Titan. I wasn't clear on the post, I just want fader control of shape speed not size. When bringing up the fader it jumps to first size value then continues shape slowly. What I need is a slow trans...

I record a look on one playback and then record a movement shape on another (channel record, size/speed on fader). When I have the look fader up and slowly bring in the movement it jumps to start. Is there a way of making it a smooth slow start when activating that shape playback? Thanks (Tiger Touc...

That would explain it. Recording palettes works great. Thanks for your help, just wanted to check I wasn't missing anything silly.

Thanks.
No, I only had faders recorded. I have now recorded in the playback window on the desk. It didn't show on the remote until I refreshed and reloaded the show. They now show on the remote, however it wont let me update or create new playbacks.

Hi, Successfully connected remote to TT2. It will control all features but in CUE area doesn't show cues already in desk and wont let me create any new ones.
Any ideas?
Thanks

That works great. Many thanks.

Yes, I'll give that a go in the morning. I assumed it was HTP, I'll change it and let you know.
Many thanks

Hi, I'm sure I'm missing something simple here but.... I've loaded TT LC025608D profile 5ch. I hit locate and dimmer channel goes to 100% but when I hit clear it stays at 100% and no playbacks will override it. I then select fixture and bring dimmer down manually on the wheel and my playback fades i...

GOT IT!
I changed phone to static and entered the same info and it appeared in remote.
Many thanks.

These are the numbers in airport :
Ip 169.254.1.24
LAN ip 10.0.1.1
Subnet 255.255.0.0

I've connected phone and it shows:
Ip10.0.1.2
Subnet 255.255.255.0
Router 10.0.1.1