What version are you running?

Joe

I have this same problem with key frame shapes playing back on some LED washes and 20 odd sunstrips programmed at full on a fader, if I push the fader up and bring it back down the key frame shape flashes and glitches out. The glitches happen when the sunstrip cue reaches the bottom and deactivates....

Hi Hushhush,

We have a few of these IIYAMA screens in our stock, work great with Avolites. They are called optical touch because they use a camera to map your touches, cheaper technology than resistive and captive but work great!

http://www.iiyama.com/gl_en/products/pr ... 2252mts-3/


Joe

Same sort of issues here, when the first cue is fired then timecode is started it will trigger the first cue again even though it has no timecode assigned to it. Not very good when sy the first cue is your houselights.

Joe

You can programme the cuelist then go through each cue one by one and merge the moving heads in. Or if you are using tracking you can turn the moving heads on in the first cue then it will track through until a block cue is seen.

Joe

Great thanks for the advice!

Even so the whole update offset with a palette is not working correctly?

Okay so its not just me?

what I was getting at is surely if I can update a palette with an offset then it would also update all my other position palettes?

Joe

Hi, Im wondering if someone can clear up some confusion i'm having with offset of pan and tilt. Am I correct in saying that if I have a position palette that is pointing to the center mic in one venue and then I get to another venue move the mover so it is now on the center mic again and press recor...

Hi John, Regarding the Shape, try changing the shape size to a lower value until the fixtures shutter is just open. With the swop button issue at the bottom of the screen where it shows what playbacks are assigned to which fader it should have a grey line and a blue line representing the flash and s...

I have tried downgrading my laptop to v7.4 but that did not help.

Also I find it hard to believe Avolites would release a new version for Titan PC Suite that did not work with Titan Backup.

Joe

Any help would be greatly appreciated, still haven't managed to get it to connect, I changed the default gateway on my PC to the ip of the tiger touch, this showed some signs of progress however still has the red line. When I changed the default gateway ip I got a blue sync line when starting back u...

Hi, Regarding updating a cue with new info, what desk are you using? Something that works across all desk is When you have the cue fired, you change the color of washes, hit record then the connect cue button then merge cue. On the tiger touch 2 desk same thing but there is a button called rec cue. ...

Hi, I am having some trouble getting the Titan backup working. When i press disk - backup my master console shows up, I press to connect it will connect however it has a constant red line and the "sync now" button is greyed out. Reading the manual it says that a red line means a network er...

Hi, does anyone know when or any information on v8. Just a rough time on when it is going to be released, days, weeks, months?

Regards

Joe

Hi,

Just wondering what the new 7.5 update for PC Suite does? It is not listed in the release notes.


Kind Regards

Joe