We have recently purchased a P2000, updated s/w to 04. Its been working fine, but ive been programming it for a gig this weekend. When I switch on first thing, the LED on handle 21 swop button flickers brightly, then over the next couple of minutes fades away to off. While its fading, if I change be...

Jeez, this is really doing my head in.... lol Just checked their web listing, yes 14ch control, but now dimmer says from dark to bright!!! now my units that have 14ch control work opposite. I'm gonna check this R20 file out first, then probably ring MilTec and find out the official mapping for them....

Thanks for the reply, I've downloaded the latest file from the personality site, just opened it up in PB, all looks ok from what I can see except the Dimmer is starting at 0 to full at 255, this would give the dimmer at full at 0% and fading down to 0 at 255 (as for some reason the unit works opposi...

Dug out my USB-Floppy drive and copied over the R20 file and made the alterations in PB. I have tried the file in Pearl 4 Sim and the file seems to work as I need it to now, but i'll try it for real in the morning with the laptop not too far away just incase!

I have a couple of MTM324 LED wash movers, I have found some errors with the personality file / lights. For some stupid reason the dimmer on the light itself is reversed i.e. address 0 = Full on and 255 = Off. It then seems that in the personality file, the dimmer is set to LTP as the LED's will nev...

Not too sure if there is a problem, as stated before the manual states: To set up the stage remote, set the console to Program mode. On the User Settings menu, set option 7 to “Remote Control” (hold down AVO and press Softkey C to display the User Settings menu). Plug in the remote. Press the bl...

I have since resolved the issue, the manual states after selecting 'remote' on the user settings, plug in the remote, and on the remote press the bottom left blank button and LEDs should flash (they dont on ours) then press 'exit' and enter '111' they should flash again - guess what - they dont. How...

Hopefully someone can help with this, I have a Pearl 2000 running 2004 (well July 05 release) software. I have the 4D tablet and riggers remote. Under user settings set option 7 to G-tablet - the tablet works perfectly. Put Option 7 to 'remote' and I can not get the remote to work. I have just made ...