Thamnks greg.
Yes that is all good, but what happens is I caht get out of the time mode once its in that mode. The set key lights up blue, and wont toggle back to normal.
Search found 25 matches
- 16 Dec 2014, 01:18
- Forum: Avolites Consoles
- Topic: Set value
- Replies: 3
- Views: 3459
- 09 Dec 2014, 13:12
- Forum: Avolites Consoles
- Topic: Set value
- Replies: 3
- Views: 3459
Set value
Ive had a few problems with the set button. As far as I understand. if you press the "set" button, you can set times for each attribute, instead of values. Then when you press set again, it should revert to setting vakues for pan/tilt...etc. But a few times the set gets stuck, so I can onl...
- 11 Oct 2014, 17:35
- Forum: Avolites Consoles
- Topic: DMX output disappearing
- Replies: 4
- Views: 3929
Re: DMX output disappearing
Yeah, I dont think that was the issue. I still had output on A and B, and the fixtures connected to C and D still showed DMX present. So I think it is some kinda disconnection inside the software.
Maybe Ill try to reconnect the universes in user settings, but a bit difficult mid show..
Thanks
Maybe Ill try to reconnect the universes in user settings, but a bit difficult mid show..
Thanks
- 11 Oct 2014, 01:51
- Forum: Avolites Consoles
- Topic: DMX output disappearing
- Replies: 4
- Views: 3929
DMX output disappearing
Ive had a problem with DMX disappearing from the outputs on the back of the console. I was using all 4 outputs, but halfway through a show C and D disappeared. the lights still showed that DMX was present but they were not rersponding. A reboot of the console made the lines appear again. has anyone ...
- 19 Sep 2014, 12:26
- Forum: Avolites Consoles
- Topic: Cuelist not firing
- Replies: 0
- Views: 3066
Cuelist not firing
Ive had an issue with cuelists not firing on a go command. It seems the cuelist triggers, but doesn't move to the next cue....This happens about 1 out of 100 times, so very difficult to determinate. But it looks as if the cuelist is triggering, and the fade time is counting, but it does not jump to ...
- 07 Sep 2014, 00:41
- Forum: Avolites Consoles
- Topic: mobile wing not working
- Replies: 0
- Views: 2892
mobile wing not working
Ive had some problems with faders on my mobile wing. Im running titan mobile and mobile wing USB to an acer laptop. All works fine, but occasionally one of the faders on my wing stops responding. I can still run the playback with the flashbutton, but the fader is not doing anything yet when I open U...
- 04 Jun 2014, 12:47
- Forum: Avolites Consoles
- Topic: Laptop
- Replies: 2
- Views: 3661
Laptop
Hi
Can any one recommend a laptop to run Titan mobile on. Currently looking at a HP pavillion15-n297sa , 8GB, RAM 750 GB HD, i5 1.6 Ghz
Can any one recommend a laptop to run Titan mobile on. Currently looking at a HP pavillion15-n297sa , 8GB, RAM 750 GB HD, i5 1.6 Ghz
- 09 Sep 2013, 14:22
- Forum: Avolites Consoles
- Topic: mode 2 in a cuelist
- Replies: 5
- Views: 4085
Re: mode 2 in a cuelist
Scrap that last bit....Pilot Error!!!!
- 09 Sep 2013, 14:17
- Forum: Avolites Consoles
- Topic: mode 2 in a cuelist
- Replies: 5
- Views: 4085
Re: mode 2 in a cuelist
Hi Nic...
Thanks, only problem now is it does not return the key lites to original state, even with release mask set...
Thanks, only problem now is it does not return the key lites to original state, even with release mask set...
- 09 Sep 2013, 14:03
- Forum: Avolites Consoles
- Topic: mode 2 in a cuelist
- Replies: 5
- Views: 4085
Re: mode 2 in a cuelist
Thanks....this might work, but is it not a bit of a round about way? Is there no setting that will allow me to just solo a cue? Is this a bug, or an oversight
Thanks al
Thanks al
- 09 Sep 2013, 12:41
- Forum: Avolites Consoles
- Topic: mode 2 in a cuelist
- Replies: 5
- Views: 4085
mode 2 in a cuelist
What is the way to achieve a blackout in a cuelist, I.E a mode 2 effect. I know I can set a playback to mode 2 and blackout the whole rig, but how do you do it in a cuelist? If I set the tr4acking to CUE ONLY, it blocks all other values in the cuelist, but not the keylites on my static PB faders or ...
- 05 Sep 2013, 21:05
- Forum: Avolites Consoles
- Topic: vl 3000 strobe problem
- Replies: 1
- Views: 2399
vl 3000 strobe problem
Hi Ive just exchanged all my spots...CP 700 HPE to VL 3000. Ive updated my palettes, but in every cue the spots has a slow strobe, eventhough Ive recorded them as no strobe. So I have to update every cue again with an open shutter. Is this a bug in the personality or the fixture? Im running V7, and ...
- 23 Jul 2013, 22:38
- Forum: Avolites Consoles
- Topic: Robe pointe
- Replies: 2
- Views: 3063
Robe pointe
Is there a Robe pointe personality yet...and how do I download it and fit it into my mobile...?
- 03 Jan 2013, 18:33
- Forum: Avolites Consoles
- Topic: view palettes...
- Replies: 3
- Views: 3732
- 03 Jan 2013, 17:14
- Forum: Avolites Consoles
- Topic: view palettes...
- Replies: 3
- Views: 3732
view palettes...
On titan mobile I used to be able to view my palettes by pressing -Open-palette- then I could edit or delete values from the palette.
Now when I do that All I get is a list of fixtures and the order...
Is there a setting somewhere so I can see the values..?
Now when I do that All I get is a list of fixtures and the order...
Is there a setting somewhere so I can see the values..?