You MUST use a 4Gb or smaller. Windows will not boot from any usb memory stick larger than 4Gb.

I have a PE 6.1 on a show with 12 movers and I swapped pan and tilt on 2 and had to invert pan and tilt on some of the others. Every thing seems fine until the console is re-started and then the 2 swapped lights revert to default Pan Tilt settings but the patch display shows them swapped. I have to ...

Ok, so last night I ran the recovery USB Drive with full formate of the drive and followed the BIOS setting Procedure in the upgrade manual exactly. Ran the console for about 4 hours and recorded about 17 cues with no problem including several saves and restarts at the end of the night. Only time wi...

So, am I OK with the Intel 330 drives that I got locally (160Gb) or are they causing my new problem. The console seemed to be working OK then a couple of hours into rehearsal for a show I got the blue screen of death, was able to restart and worked for a while, then the same thing and could not rest...

I know that you can connect a Show Safe to the Pearl Expert in case of a System failure, but I was wondering if it might be possible to do the same thing with a laptop. I recently got the blue screen of death on my console and was trying in to find options before the show. Fortunately for me we had ...

It was an OCZ drive that failed.
The new set up is up and running but haven't had time to use extensively.
Fortunately this did not happen on a show. It was set up for a training session and would not start up.

Thanks
I was able to get 2 Intel 330 drives to replace the failed OCZ.
Both drives loaded with TITAN 6.1 so if one fails I can shut down and switch cables to the other drive and restart.

Hi All
The SSD has failed in my Expert. Can any one tell me what the specifications need to be to replace it?

I have had issues with the patch display taking a long time to open on my PE with 6.1 also

OK now I'm curious, as Avolites advertising shows both the Pearl Expert and the Tiger Touch with the Show Safe and definitley lists it as an option for the PE.

I was having the same problems. When I talked to our IT guy he said that a Bootable USB drive had to be 4GB or Less. USed a 2GB drive and every thing worked fine.

I found someone who had a 2Gig drive that they let me use and was able to create the BIOS updater from that.

I have not been able to create the BIOS update stick, I keep getting a disk to big error. the smallest drive I have been able to get localy is 8 Gig. Have tried several different manufactures. I have tried RMPrep and same thing.

I may be incorrect, but I think once you change a value in a cue-list cue it becomes default until you change it again. I was once programming a long cue list, and somewhere along I made the fade time in "set times" (soft key E) 8 sec... without changing it again it made every cue after t...

Yes, definitely says that it is a cue list.