Hi,

No Worries. I got the info they were 16Bit from the user Manual, Pge 3 Section 2 Introduction. But yes no other reference to 16bit in any of the three modes.

Hi

Regards Par Quads 18's. checking the manual they are 16bit. I have changed the desk for an ETC Ion XE and loaded the same personalities and they dim smoothly. Could this be an Avo personality error or have I got something set wrong on desk?

Many Thanks

Will have to Plot clever. ( you get what you pay for )

Many Thanks.

I have a mixed rig of Generic, Chauvet 915FC's, Chauvet Colordash Par quad 18's anything over a 15sec fade time up or down causes the Par Quads to step through the fades everything else in the rig dims smoothly, Par Quads in 10 Chan Mode Dim Mode Off TT2 V11 Dimmer Curve set to Linear. Any help much...

Brill, I was sort of heading down that route but wasn't sure? So if I copy all the sunstrips to a playback master, then set that to the dimmer intensity I want ,then run the shape generator over the selected units with the parameters I want. then record this. when I playback the dimmer intensity wil...

Sorry I wasn't very clear. running the shape fine but wan't to reduce the dimmer intensity across all the lamps when the shape is running, so they are not acting like blinders,

TT2 (V9) running Sunstrips. All working fine, running shape Generator to create effects. But can't seem to set a intensity to stop them outputting lower than 100% while building the effect as the shape runs across them. Have selected intensity parameter, percentage wheels up and down but has no effe...

Hi Nic,

Thought I had sent a reply to your last message!

But all working and sorted, think the problem was the quality of the sticks I am using. Although new and Verbatim, have found some return errors and some don't.

Many Thanks.

Hi Nic, Had got to the point where I see a screen which talks you through going to the Bios screen set up, But it says you don't need to does this if you are running a TT2. So do I just remove the stick with the V9 creator software on, leaving the newly created stick still in and then reboot the des...

Hi Nic

Many thanks, it's started loading now

Sdm

Hi trying to load V9 on tt2.

Have blank memory stick ( 7.5gb) and v9 on a another stick. Keep getting error 2147024809 "FAILED TO MAKE DRIVE BOOTABLE"


Could anyone please give me a step by step idiots guide of how to load this?

Many Thanks

My setup is Tiger Touch 8.1 to a Hippo Chipmunk 3.2.1 Hippo is set to two media layers and a master layer. On TT select patch active fixtures, select chipmunk and it patches 3 layers, which it labels as 2 media layers and 1 master layer, but in reality the master layer attributes are actually just a...

Thank you for a reply to this post. I have come from a classic Tiger to a touch and now on a TT2, The change from classic to a touch is very easy and the TT2 layout is cleaner and the desk is a lot faster. But if you are new to the TT and haven't made the journey through Avolites consoles the manual...

Many Thanks

Stu

Cool, Get that, so for faster programming I would be better re-patching the two part personality 19 & 6 beam control & Aura ???

Stu