i run an Azure 2004 with Chauvet LED Rain 56 and LED Splash JR fixtures. I have found that the easiest way is to find the make and Model of the LED you are using on the Avolite personality website. It should likely be there. You will have to load the profile onto a 3.5" floppy disk (which may b...

I am thinking it is either a bad disk or a corrupt file. I have loaded a different show on the console and am able to save to that disk in a normal time frame.

I am using an Azure 2004 Shadow console and it just recently started taking a really long time to save a show to the floppy disk (like 15 minutes). The console is not heavily loaded, about 50 dimmers, 6 movers, 24 LED fixtures and 25-30 cues in a theatre stack. It has always taken a couple of minute...

Thanks for the input. After consulting the US Avolites tech support, we did a hard reset on the mother board and it came back to life. I think that the show file that I have been using is corrupt so I will need to start with clean console. I am not excited about that as it has take me a long time to...

Our Azure Shadow completely stopped working today. When you turn on the power switch, only the "Little Light" comes on. Nothing on the monitor and no LEDs on the face of the panel. We contacted Avo America and they indicated that the Motherboard may have died. Just curious if someone knows...

glad to hear I am not the only one with problems on my azure.

I use an azure shadow and to determine which recording mode you are in is pretty easy. When you press the "Record Memory" the lower left portion of the display changes your options. I believe "A" then shows whether you are in record by channel or record by fixture. The one you ar...

I am having some odd problems with the Azure Shadow console that is used at our church. The console was purchased and installed in the fall of 2007 so as far as I know it has the latest software version as there since there have been no updates. We run our console in the "Theatre Stack" Mo...

I get the wrong colors with my Robe ColorWash 250AT fixtures as well, but it does work for me.

So I was watching my Azure console and discovered that the extra fixture is selected when I press the "@" button on the White number pad in the upper left quadrant of the console. Has anyone else experienced this? Is there a fix for it?

I am running an Azure Shadow 2004, usually in theatre stack mode, but I am having some frustrations when creating my looks on stage. Initially it just happened when I was selecting dimmers, but now I am noticing that it happens when I select fixtures too. I will start with a cleared programmer and p...

Thanks for the confirmation. I am not familiar with editing the profiles, but I will take a look at it.

We are considering purchasing some Apollo Right Arms to use with some ERS fixtures. Am I able to patch the dimmer into the fixture button for the right arm? Am I able to have control over the dimmer and the movement of the fixture with the same Fixture button, or am I going to have to press one butt...

I am running an Azure Shadow with a newly acquired graphics tablet. I was trying to use the color picker with some Chauvet LED lights but was not getting any changes. Is there something special that needs to be done to utilize this feature with RGB fixtures or does the graphics tablet only work with...

Thanks for getting back to me.