Search found 15 matches
- 10 Sep 2009, 12:30
- Forum: Avolites Consoles
- Topic: Expert Titan 'froze' ...twice
- Replies: 13
- Views: 7365
I highly recommned that you load V1.2 into the desk. This should sort this issue out. Ideally you would download and make yourself a V1.2 recovery disk. you can get this from the page below; http://www.avolitesdownload.com/Downloads/PearlExpertTitan.stm Running the recovery disk will format the driv...
- 21 Apr 2009, 16:57
- Forum: Avolites Consoles
- Topic: Sapphire and Dimmer Problem - Vert urgent
- Replies: 4
- Views: 3141
- 15 Apr 2009, 14:26
- Forum: Avolites Consoles
- Topic: Renewal and Upgrading Azure 2000, Help me !! SOS ! mayday 2x
- Replies: 5
- Views: 4484
If you are getting video bus errors then it could be that your vga card is not fixed firmly in place. Check also that you have the gold plated intermediate card fitted. (this sits between the vga card and the motherboard). If this doesnt have gold plated contacts then this is the reason for all your...
- 09 Oct 2008, 11:21
- Forum: Avolites Consoles
- Topic: Expert 2.1 Bug?
- Replies: 1
- Views: 1950
Its seems as if the installation of your 2.1 went wrong somewhere. I would try again using a different memory stick perhaps. I have not heard of any problems like this with the 2.1 software. If you still have problems then try running the recovery disk after reading the instructions on the link belo...
- 22 May 2008, 18:06
- Forum: General Discussion
- Topic: Graphics Tablet
- Replies: 1
- Views: 3612
To test if the graphic tablet is working ok, simply go to the diagnostics page under the AVO menu. When you move the pen around the tablet (whilst pressing) you should see the x,y coordinates changing. Check that the values increment smoothly which indicates good communication between the tablet and...
- 29 Feb 2008, 16:50
- Forum: Avolites Consoles
- Topic: cable for graphic tablet
- Replies: 5
- Views: 4437
- 25 Feb 2008, 17:07
- Forum: Avolites Consoles
- Topic: HELP AVOLITES TIGER GO ON STOP
- Replies: 2
- Views: 2551
Hi Carlo, I need to know a few more details about your problem Please contact me at nick(at)avolites.com telling me the software version you are running and what was happening when the desk stopped. Also if you could send me a copy of your show. Also any additional information that you feel is relev...
- 25 Feb 2008, 15:32
- Forum: Avolites Consoles
- Topic: Diamond 1
- Replies: 2
- Views: 2811
You will not be able to upgrade the Damond 1 to a Diamond 2 for a couple of reasons. 1) The D1 is pretty much an analogue desk an would require a complete replacement of every circuit board. It wouldnt be cost effective. 2) There isnt enough parts available to build a complete D2! If the desk has ha...
- 12 Oct 2007, 17:30
- Forum: Avolites Consoles
- Topic: PEXP Midi
- Replies: 1
- Views: 1961
- 12 Oct 2007, 17:28
- Forum: Avolites Consoles
- Topic: Pearl SG.DAT files
- Replies: 5
- Views: 6069
- 24 Apr 2007, 16:07
- Forum: Avolites Consoles
- Topic: Azure Problem
- Replies: 4
- Views: 3865
Usually a desk that keeps restarting/resetting is a sign that the voltage reaching the motherboard is too low. The usual reason for this is either the power supply (check that it has had ECN 099 performed see link below) http://www.avolites.org.uk/support/ecns/ecn-0099.htm or more usually voltage ge...
- 26 May 2005, 15:54
- Forum: Avolites Consoles
- Topic: Clear on a Saphirre 2000
- Replies: 1
- Views: 2922
- 26 May 2005, 15:02
- Forum: Avolites Consoles
- Topic: pearl 2000 software
- Replies: 7
- Views: 8033
It sounds as if you have all the latest gals since you have lara3 and Katia 2 which are the latest. You need to check that you have Tonya 3 which lives under the small piggy back board near the dmx outputs. Pasha lives in location IC4. You do not need to do anything with the Pearl keys chip. (this c...
- 06 May 2005, 10:43
- Forum: Avolites Consoles
- Topic: pearl 2000 software
- Replies: 7
- Views: 8033
Hi Mystic, If your console has ever been serviced at Avolites then it would have had all the mods and gals updated. Go to the link below to see what gals should be present for each console. http://www.avolites.org.uk/support/avogals/avogals.htm The labels on the chips will tell you what version has ...
- 09 Mar 2004, 13:10
- Forum: Avolites Consoles
- Topic: pearl 2000 software
- Replies: 7
- Views: 8033
Pearl software for Borris 1 motherboards
Hi Maarten,
You can put any software version onto a Borris 1 motherboard so long as it has all the latest modifications. These will include extended memory, VGA card and gal reprogramming amongst other things.
Let me know if you need some further advice about this.
regards
Nick
You can put any software version onto a Borris 1 motherboard so long as it has all the latest modifications. These will include extended memory, VGA card and gal reprogramming amongst other things.
Let me know if you need some further advice about this.
regards
Nick