Search found 1230 matches

by Gregory
05 Sep 2021, 10:34
Forum: Avolites TitanOne Support
Topic: titan midi
Replies: 1
Views: 114

Re: titan midi

USB MIDI was added for the T2 and I'm afraid it is not supported on the TitanOne or T1. If this is just for preprogramming parhaps use the Internal timer or timecode from Winamp.
by Gregory
06 Aug 2021, 17:29
Forum: Avolites Consoles
Topic: Desktop specifications Titan Suite 12.x or higher
Replies: 3
Views: 321

Re: Desktop specifications Titan Suite 12.x or higher

Generally speaking the recommended specifications are there as a guide and a lot of it will depend on how many fixtures and how much programming is in your show. This combined with how much you are attempting to run at the same time (i.e. lots of playbacks at once) and how snappy you want the user i...
by Gregory
06 Aug 2021, 13:54
Forum: Avolites Consoles
Topic: Song stops after 2seconds in timeline
Replies: 3
Views: 203

Re: Song stops after 2seconds in timeline

The main thing to check would be the start time and duration of the timeline to ensure that it covers the correct range. By default timelines will release outside of this range so that might explain it especially as the default duration and release times are two seconds. In addition to that, it is p...
by Gregory
06 Aug 2021, 13:12
Forum: General Discussion
Topic: Fixture exchanging causing group layouts to change
Replies: 1
Views: 299

Re: Fixture exchanging causing group layouts to change

If the groups in question are the automatic type groups e.g. All Robin MMX Spot then whenever a fixture of that type is added it will be automatically added to that group at the end and when a fixture is exchanged from one type to another it will be removed from the type group it is in and added to ...
by Gregory
06 Jul 2021, 14:32
Forum: General Discussion
Topic: PC Suite Simulator Load Error - OneApp.IGCC
Replies: 3
Views: 597

Re: PC Suite Simulator Load Error - OneApp.IGCC

If you open up Task Manager can you see the OneApp.IGCC.WinService in the full list of applications (e.g. by switching to the Details tab)? If so you can either click End Task to try and kill it or right-click and select Go to Service(s) where you can right-click and select Stop which is a slightly ...
by Gregory
27 May 2021, 15:38
Forum: Avolites Consoles
Topic: Complete and clean installation Pearl Expert Titan v9.1
Replies: 4
Views: 608

Re: Complete and clean installation Pearl Expert Titan v9.1

It should be fine to replace the hard drive but you will need to relicense your console when you do this. From v10 onwards we required consoles to have SSDs (of at least 40GB) we have used Intel SSDs in newer consoles as these have had a good combination of performance and reliability.
by Gregory
25 May 2021, 16:20
Forum: Avolites Consoles
Topic: Complete and clean installation Pearl Expert Titan v9.1
Replies: 4
Views: 608

Re: Complete and clean installation Pearl Expert Titan v9.1

That would be to download and run a recovery stick on the console, this will completely reinstall the operating system and applications. You will download a creator which you should run on a PC, this will format and extract the required files to a USB stick. The closest recovery creator is for v9.0 ...
by Gregory
20 May 2021, 16:26
Forum: Avolites Consoles
Topic: Pearl Expert Upgrade
Replies: 6
Views: 801

Re: Pearl Expert Upgrade

I would suggest that you contact your local Avolites distributor in case they maybe have some of these spare parts or they might know of someone who does. I must ask your help to learn what other UPS board could work propely... Only an Avolites UPS will work with the Titan software, no other UPS har...
by Gregory
16 May 2021, 13:35
Forum: Avolites Consoles
Topic: Follow mode in 3D workspace
Replies: 4
Views: 398

Re: Follow mode in 3D workspace

If you have external Capture linked to Titan it should be possible to right-click within the Capture interface to point the selected fixtures in that direction. It should be possible to record palettes with that information either from the Capture software or within Titan. It is not currently possib...
by Gregory
15 May 2021, 23:52
Forum: Avolites Consoles
Topic: Pearl Expert Upgrade
Replies: 6
Views: 801

Re: Pearl Expert Upgrade

The Pearl Expert Pro still had the wing interface card, I assume it is just that all Expert Pro consoles would have come with that fitted whereas original Experts may have required it retrofitting. It does use the LVDS on the motherboard along with USB and power however I don't know how these are co...
by Gregory
15 May 2021, 16:18
Forum: Avolites Consoles
Topic: Programmer values override Group Masters?
Replies: 2
Views: 310

Re: Programmer values override Group Masters?

As group masters are applied to the raw DMX level after all the playbacks and programmer values have been merged together it is not possible to separate them out. Broadly speaking the only modifiers after the group masters are the grand master and attribute limits. There is one mode of group masters...
by Gregory
15 May 2021, 15:24
Forum: Avolites Consoles
Topic: Pearl Expert Upgrade
Replies: 6
Views: 801

Re: Pearl Expert Upgrade

Unfortunately I think it might be difficult to find compatible parts to upgrade an original Pearl Expert console, perhaps if someone had an old desk it might be possible to salvage spare parts from that. The recoveries which install the operating system and software on the console are only designed ...
by Gregory
08 May 2021, 11:44
Forum: Avolites Visualiser
Topic: Visualizer Limits?
Replies: 12
Views: 4370

Re: Visualizer Limits?

The one universe limit applies to all DMX processing including to internal or external Capture Visualiser. You can output line 1 in more than one way (physical, Art-Net, sACN) but the DMX values will be the same 512 values on all of them. When assigning Art-Net or sACN you can set the universe numbe...
by Gregory
08 May 2021, 10:55
Forum: Avolites Visualiser
Topic: Visualizer Limits?
Replies: 12
Views: 4370

Re: Visualizer Limits?

When not using Titan Simulator a T1 will only output line 1 this can be using the physical DMX port, Art-Net or sACN. Lines 2 and above are disabled. When simulating you can output more lines however there is a periodic DMX spoiler on all lines which will output random DMX at intervals.
by Gregory
28 Apr 2021, 17:24
Forum: Avolites Consoles
Topic: Titan Mobile start up question
Replies: 1
Views: 283

Re: Titan Mobile start up question

To clarify the Titan Server/Engine is what loads and runs your show file and outputs all the DMX. In this case server doesn't mean connecting to Internet, on startup both server and client are almost always on the same machine. There is a small exception if you are rejoining a TitanNet/multi-user se...