Search found 1114 matches

by Gregory
Yesterday, 16:05
Forum: Avolites Consoles
Topic: Avokey
Replies: 6
Views: 70

Re: Avokey

Yes, once a Titan Mobile and AvoKey are licensed you can use that pair on any computer to run v12 without further licensing. I believe you will need to license a T2 when you first receive it. You could then use either on either computer.
by Gregory
Yesterday, 10:29
Forum: Avolites Consoles
Topic: Avokey
Replies: 6
Views: 70

Re: Avokey

If you have a separate AvoKey for your Titan Mobile it must be used with that Titan Mobile (with the exception of Titan Simulator) however you can use those with any computer without needing to relicense. In the case of the T2 (which has the AvoKey built in) you can use that in any computer without ...
by Gregory
Yesterday, 10:11
Forum: Avolites Consoles
Topic: Titan Mobile & Titan Mobile Wing firmware version
Replies: 2
Views: 30

Re: Titan Mobile & Titan Mobile Wing firmware version

In USB Expert Console it will indicate if there are any updates available by the icon in the Connected Panels list. If the icon is blue with an arrow it means there is an update, if the icon is green it is already up-to-date. You can also switch to the Service tab where updates will be listed. Addit...
by Gregory
22 Oct 2019, 22:20
Forum: General Discussion
Topic: Avo Key with titan mobile and simulator
Replies: 3
Views: 67

Re: Avo Key with titan mobile and simulator

No, you do not require a Titan Mobile, T1 or T2 to run Titan Simulator. You will however require a licensed AvoKey to run Simulator, if you do not have one of the previous devices you can purchase an Editor AvoKey which can be used on its own to run Titan Simulator. The Editor AvoKey also allows you...
by Gregory
22 Oct 2019, 22:10
Forum: Avolites Consoles
Topic: V12 upgrade for ST
Replies: 1
Views: 37

Re: V12 upgrade for ST

Upgrading to version 12.0 is by recovery stick only. This will reinstall the operating system on your console, depending on what version you are upgrading from it may require the whole hard drive to be formatted therefore as a precaution please back up your show files and any other data before conti...
by Gregory
22 Oct 2019, 21:58
Forum: Avolites Consoles
Topic: Avokey
Replies: 6
Views: 70

Re: Avokey

You do not need to connect either the Titan software, Titan Mobile nor AvoKey to the Internet to license it. You will need a computer with a web browser capable of uploading a file and downloading a file attached to an email, this could be a PC, Mac or even potentially a smart phone. You will also r...
by Gregory
22 Oct 2019, 13:10
Forum: General Discussion
Topic: Avo Key with titan mobile and simulator
Replies: 3
Views: 67

Re: Avo Key with titan mobile and simulator

If you are using Simulator you do not need to have the Titan Mobile connected but an AvoKey must be connected for the Titan software to run. Note that you will need to have gone through the licensing process with the Titan Mobile connected to initialise the AvoKey before it can be used with Titan Si...
by Gregory
21 Oct 2019, 14:01
Forum: Avolites Consoles
Topic: Fail Boot Pearl 2010
Replies: 1
Views: 29

Re: Fail Boot Pearl 2010

Please try this instructions from the Pearl 2008 and Tiger Manual: 13.1.9 Hardware WIPEALL mode You can do a complete factory reset by fitting a link on the board. You should obviously save any show data that you want to keep. It may also be advisable to have a backup of the system software ( AVOS o...
by Gregory
21 Oct 2019, 12:20
Forum: Avolites Consoles
Topic: Active Playbacks
Replies: 3
Views: 38

Re: Active Playbacks

Can you remember if you tried releasing all playbacks, either by pressing [Release] [Release] or [Avo] + [Release] ? This might help to determine if it was the Active Playbacks window which was wrong or something else in the software. It may be worth running Log Collector on the console and submitti...
by Gregory
16 Oct 2019, 18:21
Forum: Titan Macro Library
Topic: How to check if a hanndle/playback exists?
Replies: 3
Views: 1222

Re: How to check if a hanndle/playback exists?

Try using single quotes around the location string e.g.:

Code: Select all

<step condition="Handles.IsClaimed('Location=Beams,3,25')" pause="0.01">
by Gregory
30 Sep 2019, 20:01
Forum: Avolites TitanOne Support
Topic: TitanOne Timecode
Replies: 1
Views: 173

Re: TitanOne Timecode

TitanOne can receive timecode from the Internal, Winamp and Clock sources. Internal is a manually started timer within the software which is usually used to test your programming when an external timecode source is not available, Winamp receives a timecode value from Winamp media player running on t...
by Gregory
30 Sep 2019, 14:16
Forum: Avolites Consoles
Topic: Tiger Touch II Power Up Problem
Replies: 1
Views: 285

Re: Tiger Touch II Power Up Problem

A problem with the power switch is rare but not impossible, if you could contact Lee in the Avolites Service department (repairs [at] avolites.com) he should be able to guide you through checking the connections.
by Gregory
13 Sep 2019, 14:58
Forum: Avolites Visualiser
Topic: Conect pearl Expert to visualizer
Replies: 1
Views: 1452

Re: Conect pearl Expert to visualizer

Apologies for not replying sooner. The usual way to connect to an external visualiser is via Art-Net or sACN which you can configure in the DMX Settings window in System . Most visualisation software should have an option to receive at least Art-Net. If you are using newer versions of Capture and th...
by Gregory
13 Sep 2019, 14:18
Forum: General Discussion
Topic: Titan one simulator version 11.3
Replies: 3
Views: 1055

Re: Titan one simulator version 11.3

It is not possible to expand the number of universes that can be output with a TitanOne (although you could use a DMX buffer/splitter to send the same DMX down two lines). If you require more DMX universes you could upgrade to a Titan Mobile which allows up to 16 universes over Art-Net or sACN (and ...
by Gregory
14 Aug 2019, 20:59
Forum: Titan Macro Library
Topic: Park patched fixtures macro
Replies: 5
Views: 1115

Re: Park patched fixtures macro

Sebastian asked me about a macro to park the currently selected fixtures and this is what I came up with: <macro id="Avolites.Macros.ParkSelectedFixtures" name="Park Selected Fixtures"> <description>Parks the currently selected fixtures.</description> <sequence> <step>Programmer....