If you want to use rainbow and other colour shapes with the latest RGB personalities then please use the latest shapes file (SG.DAT). (The current shapes file has the new attributes included as part of the colour shapes) This file can be downloaded from our personalities website as part of any perso...

Please put the contents of r20 files in Code blocks in the future. It makes it more readable for the everyone. Eg: [code] R20 contents [/code] Also please note that in the personalities you've posted, you're using attributes too often. (e.g. you've used A twice in the second personality.) There are ...

Hi Alessio, We already have a Diamond 4 personality for the Pixel Line 1044 in our personality website. You can find this personality here: http://www.avolitesdownload.com/PersonalityLibrary/Main.asp?ID=273&Desk=Diamond%204 When patching in the personality on the Diamond 4, the personality will ...

Hi,

Can you please contact Avolites Support ( support@avolites.com ) directly for this problem.

- David

It's a Rolaque 30

It's an analogue console.

Hi,

you need to use the ACDI application in order to use you Pearl with the Martin Show Designer.

You can find the ACDI here:
http://www.avolitesdownload.com/Downloads/ACDI.stm

- Dave

What exactly is your problem? (I'm assuming that it's just patching in fixtures?) For patching and controlling fixtures look at the user manual. Specifically Chapter 2 (Patching, p7-14) and for controlling fixtures look at Chapter 3 (Controlling Dimmers and Fxtures, p15-18) You can find a copy of th...

Just a quick question, but have you set the channels attribute correctly in the DMX table? e.g: 3 61 L 25 100 1N E 1 "Pan" 128 0 0 3 1 L 26 100 1N F 1 "Tilt" 128 0 0 (The E and F are the Pan and Tilt attributes) Also, make sure that the pan and tilt channels are in that order, an...

OK, I've just been testing out the attributes page over here, and the preliminary answer is that you can't do it. (Basically I've tried everything I could think of and couldn't scroll down the attributes page.) I'm going to show your question to Nick when he gets back, and I should be able to give y...

I've never even heard of this problem before.

By the way, which page do you mean when you say homepage? (I can think of 4 pages off the top of my head that you might be referring to...)

Note: This isn't about any console, so I've moved it to General Discussion

I'm not sure what you're referring to?

If you mean the screen that comes up when you choose "View->Patch by DMX" then to scroll up or down the list, use the up and down arrows just below the number pad.

Bylan: I've looked through the ColorWash 575 AT personalities, and they all have the correct macros in them. I would suggest redownloading the personalities, patching them in, and seeing if the problem persists. Beaker: I've checked through the Mac 250 entour personalities, and they also have the co...

Hi Alex, You should be able to use Capture by following these steps: 1) Run the Pearl Simulator. 2) Run ACDI 3) Set "SOURCE" to "Simulator". 4) Open Capture. It should then work. If this doesn't help, please either call us and ask to be put through to Support or email support@avo...

The Boris1 motherboard does not have a keyboard connector on it at all.

Could you please post a picture of your motherboard, as it might help us figure out if it is possible to connect a keyboard to your Pearl.

Please note that I’ve also emailed you.

... Please don't make posts using CAPITALS for everything. You can download a new Pearl manual via our downloads website at: http://www.avolitesdownload.com/Downloads/Pearl2004.stm Click on the 3rd link down on the page to download a PDF version of the manual. As for your new shape generator questio...