Search found 4353 matches

by niclights
Yesterday, 17:59
Forum: Avolites Consoles
Topic: Fixture inladen in Pearl 2004 via USB
Replies: 3
Views: 48

Re: Fixture inladen in Pearl 2004 via USB

Thank you. As far as I am aware the Usb floppy replacement is not an official Avolites part. My understanding is the BUM board is required in order to run the 2008 software which adds official Usb support. I don't have any experience with the floppy replacement. However, there are some topics that m...
by niclights
Yesterday, 16:20
Forum: Avolites Consoles
Topic: Fixture inladen in Pearl 2004 via USB
Replies: 3
Views: 48

Re: Fixture inladen in Pearl 2004 via USB

Does the console have a BUM board fitted? Or has the floppy drive been replaced with Usb? This will almost certainly be significant. It might be helpful if you are able to provide photos showing the front, top, rear and inside.
by niclights
23 Sep 2021, 17:56
Forum: General Discussion
Topic: PC Suite Simulator Load Error - OneApp.IGCC
Replies: 5
Views: 928

Re: PC Suite Simulator Load Error - OneApp.IGCC

i have problem running Titan PC SUITE, I've waited more than 1 hour for the program to run but it only shows Starting Titan . i have tried to install v11.0 to v11.4 correctly but no change. Anyone know how to solve this? Have you tried the fix in the posts above, specifically stopping and disabling...
by niclights
21 Sep 2021, 11:52
Forum: Avolites Consoles
Topic: Default home position
Replies: 2
Views: 58

Re: Default home position

There is a toggle option to release to playback values (accessed via User Settings -> Clear or by holding Clear -> [Clear Options]). This is disabled by default. When enabled all the attributes will return to the last playback value for those attributes (or the default defined in the personality if ...
by niclights
16 Sep 2021, 16:24
Forum: Avolites Consoles
Topic: Problem : shutter bug after loading show
Replies: 2
Views: 602

Re: Problem : shutter bug after loading show

I appreciate you mentioned groups but I still wonder if the shutter part is coincidental and this is related to a group set to scale master with the scale set to zero (for example a group of the fixtures that happen to have shutter controls that was assigned to a fader, the fader set to zero and the...
by niclights
09 Sep 2021, 15:22
Forum: Avolites Consoles
Topic: Effects on groups
Replies: 4
Views: 328

Re: Effects on groups

Look into copy fixture.
by niclights
09 Sep 2021, 12:41
Forum: General Discussion
Topic: Controlling Fan
Replies: 2
Views: 639

Re: Controlling Fan

Forgot to say that if you prefer your fan as HTP then another option is to patch as two dimmers instead.
by niclights
09 Sep 2021, 11:45
Forum: General Discussion
Topic: Controlling Fan
Replies: 2
Views: 639

Re: Controlling Fan

The fan speed will be LTP and therefore will stay at the last value set. One solution might be to set the playback to mode 2. It will then return to the previous value when you unlatch (you may need to manually set the fan to zero initially). Or, along similar lines, you could set a release mask on ...
by niclights
28 Aug 2021, 12:55
Forum: General Discussion
Topic: PC Suite Simulator Load Error - OneApp.IGCC
Replies: 5
Views: 928

Re: PC Suite Simulator Load Error - OneApp.IGCC

You can disable it from starting by going to Task Manager -> Services tab -> Open Services (at the bottom) -> right-click Intel(R) Graphics Command Center Service and select Properties -> (in the General tab) set Startup type to Disabled -> Apply (full explanation in the troubleshooting guide here )
by niclights
06 Aug 2021, 12:38
Forum: Avolites Consoles
Topic: Shape Generator inside a Key Frame Shape? how to?
Replies: 1
Views: 333

Re: Shape Generator inside a Key Frame Shape? how to?

It is not possible to have a shape generaor inside a key frame shape. However, you could have a shape and a key frame shape recorded in the same cue. 0.22 in the video just looks like a pan shape to me (or possibly a two frame key frame shape) - the difference would be whether the values are relativ...
by niclights
31 Jul 2021, 09:24
Forum: Avolites Visualiser
Topic: Bug Atomic3000 / sgm x-5 4Ch.
Replies: 1
Views: 730

Re: Bug Atomic3000 / sgm x-5 4Ch.

Hi,

These have been fixed in response to your email. Please try with the latest library.
by niclights
25 Jul 2021, 11:05
Forum: General Discussion
Topic: Enttec Elm Software - Pixel Panels
Replies: 7
Views: 514

Re: Enttec Elm Software - Pixel Panels

It might be easier if I can see what you are doing. If you can send me a simple showfile demonstrating the problem I will be happy to take a look. nick dot morris at avolites dot com.
by niclights
24 Jul 2021, 10:16
Forum: General Discussion
Topic: Enttec Elm Software - Pixel Panels
Replies: 7
Views: 514

Re: Enttec Elm Software - Pixel Panels

The Media Index functions are not fadeable and should snap regardless. Perhaps you could explain exactly what you are trying to achieve and the way you are currently going about it?
by niclights
23 Jul 2021, 23:46
Forum: General Discussion
Topic: Enttec Elm Software - Pixel Panels
Replies: 7
Views: 514

Re: Enttec Elm Software - Pixel Panels

Are you using the Enttec LED Mapper personality and are you talking about the Media Index functions?
by niclights
23 Jul 2021, 14:39
Forum: General Discussion
Topic: Enttec Elm Software - Pixel Panels
Replies: 7
Views: 514

Re: Enttec Elm Software - Pixel Panels

1. To snap between steps of a chase set the xfade to 0%. 2. By default playbacks will activate when they reach the trigger point (slightly above zero) and then the level of a playback fader will proportionally control the level of any dimmers recorded. Are you using the Enttec LED Mapper personality...