Search found 4191 matches

by niclights
Yesterday, 10:02
Forum: Avolites TitanOne Support
Topic: Symmetrical effects
Replies: 3
Views: 26

Re: Symmetrical effects

That wouldn't be a circle though. And while it is possible to make a circle using key frame it is much harder and it would also be absolute so you couldn't apply it around an existing position.
by niclights
15 Jun 2019, 09:37
Forum: Avolites TitanOne Support
Topic: Symmetrical effects
Replies: 3
Views: 26

Re: Symmetrical effects

To get a symmetrical circle reverse the shape and set the phase offset to 180° on the fixtures that are being mirrored. You can use this in conjunction with spread and fixture order etc. but the fundamentals are the reverse and phase offset. Use the [Restart Shapes] option in the shape gen menu to r...
by niclights
15 Jun 2019, 09:02
Forum: General Discussion
Topic: Titan personality for EUROLITE LED Pixel Tube 360°
Replies: 4
Views: 31

Re: Titan personality for EUROLITE LED Pixel Tube 360°

You can change functions of one control depending on another by using conditions. For examples take a look at the gobos in a typical moving spot (usually fixed/shake/scroll).
by niclights
14 Jun 2019, 23:57
Forum: General Discussion
Topic: Titan personality for EUROLITE LED Pixel Tube 360°
Replies: 4
Views: 31

Re: Titan personality for EUROLITE LED Pixel Tube 360°

I don't have the time to go into the details of how to create a personality for this at the moment but if you submit a new request via the form on the personality website here I will arrange to add a personality to the library for you. From a factory personality perspective I would probably look to ...
by niclights
20 May 2019, 13:53
Forum: General Discussion
Topic: Programming/Effects on new lamp ADJ 32 Hex panel help
Replies: 1
Views: 101

Re: Programming/Effects on new lamp ADJ 32 Hex panel help

You could try using key frame shapes. This will rely on the group layout so you might want to adjust this first. Then [Shapes And Effects], [Key Frame Shape], [Create], <select group>, <set 100% white values>, [Add Frame], <set 5% blue values>, [Add Frame], [Finish Recording Frames]. Then in the Eff...
by niclights
19 May 2019, 15:07
Forum: Avolites Consoles
Topic: Personalities with fractional values only load in same version.
Replies: 2
Views: 112

Re: Personalities with fractional values only load in same version.

Firstly, on behalf of software I would like to thank you for taking the time to investigate and report this. I thought that was very well described and understood in depth. From what I can gather the software appears to be adding an extra .0 to the display range in the xml part of the showfile when ...
by niclights
12 May 2019, 17:49
Forum: Avolites Consoles
Topic: Show incompabilty after update from 11. to 11.3
Replies: 2
Views: 145

Re: Show incompabilty after update from 11. to 11.3

I think the error message could perhaps be more helpful here. Are you trying to load an autosave? Autosaves are compact versions for efficiency and are not compatible across versions. Initial and Quick save should be ok. If you are using an Autosave and need that then the solution is to revert to th...
by niclights
29 Apr 2019, 18:48
Forum: Avolites Consoles
Topic: Channels details before patching
Replies: 2
Views: 136

Re: Channels details before patching

Unfortunately there is no way to do this within the Titan UI at the moment. I agree it would be useful in some circumstances though and has been mentioned before. Hopefully it is something that will be possible in a future version. In the meantime if you have access to the internet then the easiest ...
by niclights
27 Apr 2019, 11:31
Forum: Avolites Consoles
Topic: Overriding a chase with another one
Replies: 1
Views: 89

Re: Overriding a chase with another one

Turn on playback option Cross Fade HTP in the cue with the two-step chase. For this to work it is important that all of the steps in both chases have zero values explicitly recorded for the pars in the off states. So in the four-step chase step 1 = 1@ full, 2@0, 3@0, 4@0, step 2 = 1@0, 2@full, 3@0, ...
by niclights
26 Apr 2019, 11:11
Forum: Avolites Personality Builder
Topic: Avolites Personallity export
Replies: 1
Views: 498

Re: Avolites Personallity export

No, unfortunately this is not currently possible. They are both xml but have different structures. Perhaps you could contact MA and request?
by niclights
25 Apr 2019, 18:42
Forum: Avolites TitanOne Support
Topic: missing beams in capture
Replies: 2
Views: 209

Re: missing beams in capture

Are you certain the Visualiser Dmx Output is turned on in DMX Settings? I only ask because you mentioned this. Normally you would not need to adjust it as it is turned on by default and highlighting in Capture but no beams sounds like it is turned off.
by niclights
23 Apr 2019, 18:40
Forum: Avolites TitanOne Support
Topic: Soundguy ha ha
Replies: 3
Views: 612

Re: Soundguy ha ha

You either need Titan Simulator or TitanOne both of which are installed as part of Titan PC Suite. Both options should appear in the start menu under Avolites. If you want to output to fixtures and have the dongle connected you should use TitanOne. If you do not have the dongle connected you can use...
by niclights
22 Apr 2019, 10:03
Forum: Avolites Personality Builder
Topic: IF ELSE CONDITION
Replies: 1
Views: 200

Re: IF ELSE CONDITION

The condition string syntax is mostly explained in the prompt at the bottom of the screen when you select the condition field but to reiterate the condition statement references the attribute ID and function ID (number). The attribute ID must be enclosed in single quotes. Logical operators are == fo...
by niclights
19 Apr 2019, 17:05
Forum: Avolites Consoles
Topic: Palette Overlap
Replies: 18
Views: 749

Re: Palette Overlap

So there's no other way to change the overlap order than doing it each time again after clearing? As far as I am aware direction is not used for live timed palette recalls. So it is not about clearing but about needing a fixture order (either manually from selection or from a group) Other question:...
by niclights
19 Apr 2019, 16:56
Forum: Avolites Consoles
Topic: Request send
Replies: 3
Views: 185

Re: Request send

If you know the manufacturer name but it isn't currently available in the list then select 'Other' and enter the name. If you do not know the name then select 'Unknown'.